By ordering drilling holes in pipes for Yuda, you will get a quality result at an affordable cost. Private craftsmen and specialized companies in Moscow are registered here, providing plumbing services at affordable prices.

To find an artist, create a task on the YouDo website. Write that you want to order drilling holes in the pipes of a house or apartment, and publish an application. After the masters and representatives of construction organizations read the application, you will begin to receive feedback from them. After studying the information about the performers - their work experience, rating on YouDo, you can choose the right master and discuss the details of the order. Full transparency of work, no intermediaries between you and a private master - a guarantee of reliability and no overpayments.

How do YouDo performers work?

Moscow specialists registered on YouDo provide services at competitive rates, taking into account all the requirements of the customer when drilling. At a convenient time, the master will come to you to assess the amount of work and make calculations.

The performers act according to the following algorithm:

• inspect pipes, make measurements, markup and section
• make a budget for work
• coordinate the project documentation with you and start drilling

Experienced craftsmen make holes in plastic, cast iron, steel, ceramic products. The specialized specialists have all the necessary equipment and tools - files, drilling machines, drills. YouDo performers always perform work in full compliance with safety regulations. In the process of drilling, the masters put on special equipment - respirators, gloves, goggles.

Metal pipes are a very specific material and when working with them you need to be extremely careful and remember that:

• when drilling holes of large diameter, first a hole is drilled with a drill of a smaller caliber (1-3 mm less than the main hole), and only after that drilling is performed with the main drill;
• in the case, you need to rotate the drill slowly;
• so that metal chips do not jam the drill during drilling, it must be periodically released;
• to increase drilling productivity, you can use lubricant - machine oil (for steel) and soapy emulsion (for brass, duralumin and copper);
• in order to securely fix the round pipe in a vise, one nut can be installed between the jaws and the pipe on both sides.

You can also use several more methods by which you can achieve an accurate cross-section when drilling holes in pipes:

• you can use a conductor - a metal bar with an M-shaped section and several different-sized holes for drills;
• as a blank, you can use a wooden block in which a hole is pre-drilled to fit the pipe and holes of different diameters - you just need to insert the pipe into the blank and start drilling. The drilling process is similar to, however, it is a more difficult process than even.

YouDo performers prioritize advanced technology when drilling. Masters widely use cutting diamond tools. This makes it possible to achieve low noise levels and high drilling accuracy. Diamond drilling provides a low vibration threshold, there is no dust during operation, and the holes are perfectly even and round. They do not need to be processed afterwards.

Terms of work

Exactly how long drilling will take, the master will tell after inspecting the objects and devices in the house or apartment. Factors affecting the duration of drilling are:

• level of difficulty in punching a hole in the floor or walls
• type and configuration of the pipe (specialists work with plastic, cast iron, steel, ceramic products of various production)
• type of drilling tools used

The master will be able to assess how time-consuming the process is only after talking with you, inspecting communications and drawing up a work plan.

The goal of each YouDo performer is to increase and consolidate their positions in the system. The rating of the master is directly affected by the number of projects, the quality of which satisfied the customers. If you are satisfied with the service provided - whether it is drilling or welding, the position of a specialist on YouDo will become higher.

Masters always have the necessary drills and nozzles for drilling holes in products, devices and mechanisms from any material. Thanks to their professional skills, the workers solve the tasks in a short time, saving your time.

How much do YouDo performers cost?

Flexible pricing for masters registered on YouDo is one of the reasons to order their services. Moscow private masters always take into account the financial wishes of the customer and offer affordable rates for repair and construction services.

The cost of drilling or welding is influenced by factors such as:

• diameter and thickness of products or parts of mechanisms
• the need to dismantle old communications
• volume and duration of work

The specialist will tell you the exact price after assessing the complexity of the task. The cost of the work, as well as the timing of its implementation, you discuss with the contractor individually.

Masters registered on YouDo provide a full range of drilling services at competitive prices. Specialists drill holes for laying water supply, sewerage, ventilation, heating and air conditioning systems. If you need to run a cable, you can also contact the YouDo performers. Masters will perform work at a high professional level and at a bargain price.

Benefits of ordering services on YouDo

Self-drilling cannot be done without special knowledge and the necessary tools that Yudu performers have. Masters are fluent in the technology of drilling pipelines of any thickness and under pressure. You can trust contractors to do a lot of work, as well as to drill holes in a metal pipe in a limited amount. Masters with jewelry precision, in accordance with the markup, will punch round holes in the pipe - large or small.

To make sure that the specialists are responsible, the YouDo administration checks the information about each master who registers on the site. Only after the administrators confirm the accuracy of the information, the specialist can offer his help on YouDo.

By ordering services on YouDo, you can:

• entrust specialists with any type of drilling work (YouDo performers drill holes for laying cables, drains, ventilation, heating systems, installing plumbing fixtures)
• save money, while getting a professional result (with the master you will come to an agreement on a price that will be beneficial for both parties)
• entrust the contractors with the purchase and delivery of consumables (specialists will purchase and bring everything you need to the address you specified)

Entrust engineering and technical work to YouDo performers. Masters in the best possible way will drill holes in the pipes.

Citation is material borrowed from other sources (direct use of the text).

Verbatim quoting is enclosed in quotation marks, the link / footnote must indicate the exact page from which the phrase was taken.

Quoting “in your own words” is written without quotes, a link to a book / article is allowed without indicating the page of the source, however, with the mention of the author’s surname and initials, title of the book / article, city, year of issue and publisher.

Currently, the highest requirements are placed on the originality of dissertations. If the information for the thesis can be 20% - 30% borrowed, then in the Ph.D. thesis, citation is allowed to use a maximum of 10% of the total amount of research.

What is typical, while theses and term papers are checked using the Antiplagiat.ru program, which “sees” every fourth downloaded word from the Internet, dissertations are tracked by Antiplagiarism.university, where it is displayed every third word.

The meaning of these programs is to assess how well the material has been worked out and “passed through itself” by the author of the dissertation. Currently, there is not a single program that would artificially increase originality with the help of hidden characters - all these tricks are entered into the database and are easily recognized by the machine. Only when writing phrases “in your own words” is the text perceived as unique.

Figure 1 - An example of a summary report of the Anti-plagiarism.university program

The screenshot shows how the program highlights “plagiarism” in red, quoted quotes in green, and unique text in blue.

Thus, the program highlights plagiarism in the text (Figure 2):

Figure 2 - An example of a full report of the Anti-plagiarism.university program

Figure 3 - Sources of plagiarism

By clicking on the chain, you can go to the site where the text phrase was taken from (Figure 4).

Figure 5 shows the recognition by the citation program (Figure 5):

Figure 5 - Quoting text

The program highlights the citation in green. As you can see in Figure 5, the program takes “quoted” phrases of the text for cited material. Even if the source from which the information is quoted is not included in the anti-plagiarism program, and you quoted it, the program will in any case “take it into account” and reduce the percentage of originality of your research.

The figure also contains a small piece of text that the program took for plagiarism:

Such shortcomings of the system should also be taken into account when writing a dissertation and try to paraphrase the entire text as much as possible in order to increase the uniqueness of your research.

How to order?

Use the order form: Order Use the 24/7 hotline: 8-800-333-87-10 Write to us on WhatsApp / Viber: 8 906 968 1740 Contact us via Skype: Or email us:

Reviews

I myself live in Germany, and it was difficult for me to find an expert on my problem here. I was surprised that in your organization you can find such narrow specialists in the field of pedagogy. Not only did I like my work, but the whole commission liked it. And some elements of the dissertation will be introduced into the education system of our Russian school in Dresden.

Oksana 12.01.2018

I would like to thank your company for the prompt and high-quality work. I did not expect that such a high quality work can be ordered via the Internet. It is a pity that I did not know about your company before, otherwise I would have used only your services. Separately, I would like to thank the author, who helped me with the research on jurisprudence. Having a large amount of material for the dissertation, I thought it would be easy to put it together, but compilation is a lot of work, probably even easier to write everything from scratch than to compile ready-made information from dozens of sources. So thank you so much for helping me figure this out!

Anastasia K. 12/31/2017

My review is more negative than positive. It really annoys me how much writing I have to do when my work is not related to it at all. I spent a huge amount of time collecting information, but there were no results - either the font in the work is not the same, roughly speaking, or the list of references is not designed in the same way. Nonsense - the commission does not see the essence of the work behind this nonsense. The author sorted everything into the site and systematized it, wrote according to GOST (sometimes it seems to me that it is he who is more important than the meaning of the work). In general, a month later I already had 4 articles of the Higher Attestation Commission in my hands, and after three - the entire candidate, which I myself could not write for three years. Thank you very much! I marvel at your patience!

Fedor. 12.12.2017

I liked the work, everything was fine. It was especially noteworthy that the study included the author's position, not written off from the Internet or from books of hackneyed citations of the same axioms - there was an individual author's opinion, which came out in my favor during the defense. I am also pleased with the efficiency, especially when you need to contact the author for some questions and clarifications. And, most importantly, everything is clearly recorded in the correspondence with the performer. All the details, from the beginning of placing an order to sending it to me - everything is well thought out, so to speak, executed at the European level. I recommend.

Oleg M. 02.11.2017

Very grateful site! Firstly, for the quality of work, secondly, for the organization of the entire process of placing and fulfilling an order, and thirdly, for the price (also an important point, you must agree). I highly recommend ordering papers on jurisprudence here. I am especially embarrassed by modern anti-plagiarism, which, it seems, cannot be bypassed with citations from the legislation - but here the author showed all the miracles of vocabulary and syntax, which made it possible to reach a high percentage of originality of the work in the MGIMO anti-plagiarism.

Alexander. 10/19/2017

I try to apply to such organizations only on recommendations. Therefore, I ordered a job here, already knowing about all the advantages and positive aspects of the candidate5. I ordered a Ph.D. thesis in its entirety, because I wanted the research to trace a single author's style and style, and secondly, it was cheaper. I was very pleased that all the Candidate5 employees always met my needs, and most importantly, they were diligent.

Many thanks to Candidate5! I first ordered an abstract from another company, but they sent me not just a bad abstract - in addition, it was completely downloaded from the Internet! I was in despair, because the supervisor liked the idea of ​​the work, but it was written, according to him, poorly. This time, having already read reviews about various organizations in advance, I decided to apply as a candidate5 in the end and did not lose. The author "combed" my abstract, leaving the idea and the general meaning, beautifully corrected all the shortcomings, raised the originality. Therefore, I already calmly ordered the first chapter of the candidate here. The chapter was also well written. My good ones! I want to order the second chapter from you! Thank you, you really help!!!

At my job, having a candidate minimum is very profitable - both career growth and an increase in salary. But there was not a minute in my schedule to write a paper. I contacted candidat5. I was pleasantly surprised that the author supervised me from beginning to end: she came up with a topic for me, and drew up a plan, and wrote the entire candidate’s thesis, and an abstract, and a speech, and a review, etc. – in general, all inclusive.

I decided to write a review on the fact - after the defense. First of all, thank you for your hard work. Secondly, what I liked: my order was completed accurately on time, everything was done exactly as it was agreed between me and the author. Also important is the fact that in the work I did not see copywriting - only living research. What I didn't like: I liked everything!

I hate bureaucratic red tape and paperwork. I was very pleased when I turned to kandidat5.ru: the author brought my work to perfection, sorted out the mess that I had mixed in the study, added up-to-date information, designed everything in accordance with GOST, which would generally take several hours of my time. There were also disadvantages, but on my part: my mistake was that I did not immediately provide the entire list of my “wishes” - here it’s better to discuss everything with the author in advance so that there are no delays and strains later. But here, too, the author showed patience. In general, their employees are very polite, responsive, at any time they are ready to answer all questions, which is also important.

The article is devoted to the rules of citation in scientific papers. We will tell you about the general rules for citing, about special cases and common mistakes that authors make.

Introduction

The topic of the correct design of borrowed elements has recently become very discussed. More serious attention to plagiarism and several scandals involving dissertations of famous people have led to a tightening of citation requirements in scientific papers.

Scientific work without citation is impossible. The fine line between plagiarism and citation lies in the observance of the rules described in GOSTs and methodological manuals. Unfortunately, some manuals do not provide accurate answers to citation questions, leaving gaps. The publishing house "Young scientist" continues to talk about the correct design of your work and in this material will recall the basic rules of scientific citation.

General rules

What is a citation? A citation is:

• borrowing a fragment of the author's text;
• borrowing formulas, provisions, illustrations, tables and other elements;
• non-verbatim, translated or paraphrased reproduction of a piece of text;
• analysis of the content of other publications in the text of the work.

The most important rule for quoting is to accompany the quotation with a link to a specific source from . The absence of a link in a citation or the absence of a citation in the presence of a link is a gross error in the design of the work. For example, in the publishing house "Young Scientist" this may be the reason for returning your article for revision.

1. Be sure to put quotation marks when rewriting the source text verbatim. Otherwise, such a quote will become plagiarism.
2. The text of the quote must be complete. Arbitrary shortening of the text is unacceptable.
3. When referring to the author, indicate his surname and initials. The initials are placed before the surname, for example, “M.T. Kalashnikov" or "S. Hawking. It is not necessary to write the names of the authors in their entirety, even if they are quite well-known - the initials are enough.
4. Do not start a paragraph with a quote, initials, or the author's last name.
5. All references in the work are made in the same style.

In scientific papers, this type of citation is common, such as paraphrase. This is the name of retelling a quote in your own words. In this case, the reference to the author is also obligatory, as well as the preservation of the meaning in the retelling. A paraphrase is appropriate in the following cases:

• providing generalized information when referring to several sources;
• a brief summary of the voluminous theoretical concept;
• voluminous quotes, inapplicable for direct mention.

Quote change allowed only in special cases. As a rule, this is undesirable, but there are cases when GOST R 7.0.5_2008 "Bibliographic reference" and methodological manuals allow the author to make changes to the quotation:

1. When expanding abbreviated words into full ones. In this case, you need to take the completed part of the word in square brackets.
2. When changing the case of words in a quote. A change is permissible only if the quotation obeys the syntactic structure of the phrase in which it is included.
3. When citing works published before the reform of Russian spelling in 1918.
4. When designating typos and errors in the text of the document. The error is not corrected, but a correctly spelled word in square brackets or a question mark in brackets is put.

Special cases

There are special options for quoting text used in particular cases. These options include quoting from secondary sources, mentioning foreign authors and terms, self-quoting and citing legislative acts.

Citation from secondary sources is possible only at the stage of acquaintance with the topic and problems of the study, as well as to determine the conceptual apparatus of the work. All quotations used in this way should be carefully checked against primary sources. You also need to be sure that no errors were made in the secondary source. Cases in which quoting from a secondary source is possible:

• the original source is lost or inaccessible (for example, located in closed archives or libraries);
• the original source is written in a language that is difficult to translate;
• the text of the quotation is known by recording the words of their author in the memoirs of other persons;
• The quotation is given to illustrate the author's train of thought and argumentation.

At the mention names of foreign authors, as well as at citing foreign sources, the text of the source is also given not in the original language, but in the language of the scientific work (for example, in Russian). If the correctness of the translation is in doubt, a paraphrase can be used. In the event that the author is not widely known in Russian science, it is necessary to additionally write his original surname and initials in brackets.

It is important to correctly transliterate the author's last name. To do this, you can refer to Russian-language sources and publications on this topic. With a high degree of probability, the source of the quote has already been indicated and has been translated into Russian. Note that in the list of sources used, foreign publications are indicated in the original language.

Self-citation- a frequent practice in Russian scientific papers. Previously published research by the author may be the source of the citation. This type of citation will avoid duplication of information and self-plagiarism, as well as help direct the interested reader to previous and related works. Your own citations must be formatted according to all citation rules. It must be remembered that citing one's own works should be appropriate and justified, complement the scientific work and follow its objectives.

Citation of legislative acts should be carried out strictly according to primary sources, especially since all legal and by-laws are public and publicly available information. Carrying out a quote from secondary sources would look inappropriate and completely unjustified. You need to make sure that the current version of the law is used and that the law has entered into force. This can be checked using any legal system, for example, "ConsultantPlus" (http://www.consultant.ru).

Common quoting mistakes

Despite the conciseness and unambiguity of the citation rules, the authors of scientific papers make mistakes from time to time. Let's see how the most common errors occur.

1. Lack of reference in the list of references. Such an error may be the result of simple inattention, but it is considered as a serious flaw.
2. Links to popular publications or to authors who do not have the proper scientific qualifications. The qualifications of the authors must be checked based on the style of work and information found about the author and the publication itself. In the event that there are doubts about the qualifications of the author, it is better to avoid quoting him.
3. Lack of links when placing graphic materials. When borrowing graphic materials (for example, diagrams, diagrams, figures), as well as tables, you must provide a link to the source of information. Such information without reference to the source will be a copyright infringement.
4. Verbatim rewriting of the text and "queues" of quotations. In order to keep the narrative alive, it is necessary to use quotations within reasonable limits, as well as vary the form of quoting. For example, use a paraphrase.
5. Violation of the rules of secondary quoting. Authors quite often cite information as if they themselves found it in the primary source or as if it belonged to the author of a secondary source.
6. Mistakes in citing foreign authors. Incorrect translation of the author's surname, lack of original spelling of the name and surname, errors in paraphrase when using the source independently. It is also important to remember that in the list of references the names of sources of citations should be given in the original language.
7. The use of quotations with unverified authorship, as well as quotations containing banal or erroneous statements.
8. And, finally, the most unforgivable and unethical mistake: the lack of quotes and a link to the source of information. In this case, the quote is considered plagiarism.

In the article, we examined the main features of scientific citation. It is usually enough to know these simple rules in order to strictly observe copyright and be insured against unintentional plagiarism. If you want to delve into the problem and find out more details and subtleties, then we recommend the excellent methodological guide T.O. Kulinkovich.

The success of its promotion on the network depends on the quality and uniqueness of the content that the site is filled with. Uniqueness is also required from educational works, such as abstracts, term papers, diplomas, author's works, and so on.

• How to Make Text Unique: 4 Steps
• How to Make Text Unique: 6 Honest Ways
• How to cheat the anti-plagiarism program: dishonest ways
• Ways that will NOT help to uniqueize text

When it is impossible to write a completely unique text, resort to rewriting, or rewriting (from English rewrite, rewrite). Rewriting is somewhat reminiscent of a school presentation, when the source text is retold (rewritten) in your own words. However, rewriting can also be different - sometimes you need to work out not one, but several sources, change the structure of the text (the so-called deep rewrite), sometimes it’s enough just to replace some words with synonyms.

The uniqueness of the text is checked using special anti-plagiarism programs and is measured as a percentage. If the text is completely or partially stolen from another resource, the program will show a low percentage of uniqueness, and also highlight non-unique passages and show their source.

Below are useful tips on how to achieve uniqueness and cheat anti-plagiarism. We hope that these tips will help to make the original text loyally perceived by the customer and search engines.

How to Make Text Unique: 4 Steps

So, here is an approximate algorithm of how to bypass anti-plagiarism and achieve a unique result.

Step 1. Choose a service to check

First you need to decide on the service that will check our work. There are many anti-plagiarism programs. If the customer did not indicate a specific program, then it is better to check the uniqueness with 1-2 programs of your choice.

Some of them (like etxt, advego) require downloading and installation on a computer. Others, such as text.ru, are available to users online.

At the same time, you should be prepared for the fact that different services show different percentages of text uniqueness. The difference in readings can reach 50%!

The fact is that each of them has its own algorithm for calculating and analyzing text material, which is inaccessible to most users.

Step 2: Save All Text Variations

The next step on the way to how to bypass anti-plagiarism is to save all versions of the text: both the original one and all the others.

The main thing is not to get confused and consistently change the structure and content, achieving the desired indicator of the anti-plagiarism program.

Step 3. Making the text unique

How to achieve this - read below. If uniqueness of 98-100% is not required, it is better to play it safe and make the uniqueness 5-10% higher than necessary in order to pass verification on any service.

If free applications show a good indicator, then paid ones can underestimate, and as a result, the uniqueness will not be what the customer required.

Knowledge is power! Or how to use shingle rules

A single is a small piece of text consisting of several words, which is used to check the uniqueness of what is written. If the shingle "3" is specified, this means that three words will be checked. Such data is set in the parameters of the program itself. It is easier to fool the anti-plagian if you know this value.

The higher the shingle value, the easier it is to achieve author's original material. But the optimal value for the customer and the contractor will be 4-5 words. Replace the first or last word in a phrase, and the text will immediately become original.

Step 4. Save the finished text

As soon as the required percentage of originality is obtained, the text must be saved and sent for verification.

All ways to get around the anti-plagiarism program can be divided into honest (when the uniqueness of the text really increases) and dishonest (when the text remains the same, but the program perceives it as unique). Let's take a look at them.

How to Make Text Unique: 6 Honest Ways

Below are working tools that will help make any source material unique for search engines.

Method 1. Deep processing of the source material / retelling in your own words

This is what is called rewriting, which literally means "rewriting" in English.

Method 2. Using synonyms

Do you want to know the answer, how to pass anti-plagiarism? Use synonyms. It is important to understand here: despite the fact that synonyms often make the material unique, the author is forced to constantly be in search of certain substitute words. As a result, he gets hung up on this, from which the meaning of the text suffers.

Another interesting feature is to insert formulas and tables as pictures. This technique allows you to increase the uniqueness of the text.

If the selection of synonyms goes badly, use synonymizers. Synonymizers are special applications that allow you to quickly pick up words that are different in spelling, but similar in meaning to the original query. They are available on a paid or free basis.

In them, you can request not only individual terms, but also entire phrases. This is convenient, but still does not make it possible to completely rewrite the old material in a few seconds.

Method 3. Translation of text from sources in another language

Translating text from sources in another language is a great way to fool etxt anti-plagiarism and any other program. The output is a completely unique work, because the source text for rewriting is published in another language.

The problems are that

• you need to find material that is suitable in content, written in a foreign language. Obviously, you will have to find several sources to get the required content.
• you need to be able to translate it correctly.

Translations themselves pay much better than rewriting. Read more in the article: " How to make money translating articles».

Method 4. Replacing frequently repeated words

Often these are some kind of conjunctions or words that are semantically related to keys. We replace 1-2 with synonyms that are close in meaning.

Method 5. Reworking the sentence from the end

Many sentences that are used in articles and other materials are complex. That is, they have two parts, of which one is subordinate to the other. It is enough to swap them in order to achieve not 100% uniqueness, but a good coefficient.

Again, a lot will depend on the size of the shingle. But in many cases, the meaning of a particular phrase can be conveyed to the reader in reverse order.

Method 6. Using words like "directly"

It is believed that the use of this or similar adverbs twice per 1000 characters will make the text more authorial, that is, original. With more frequent use, it can begin to catch the eye. But here a certain skill is required in order to correctly and appropriately enter these adverbs.

How to cheat the anti-plagiarism program: dishonest ways

In addition to honest (or relatively honest) methods, there are also dishonest methods that help to deceive the anti-plagiarism program, forcing it to evaluate non-unique text as unique.

• Adding automatic hyphens

On the one hand, a very simple way from the field of how to cheat anti-plagiarism for free. On the other hand, this is not welcomed in all works.

For abstracts, this may be a suitable solution, but when writing articles for publication on websites, customers will not accept work with transfers, and their removal will immediately reveal the true state of affairs. Therefore, it is necessary to stipulate all the technical nuances in advance.

• Use of material not indexed by search engines

As a rule, search robots analyze the material taken from the site and enter data about it into the repository. The indexed text is thus one that has already been checked by Google search engines and others.

• Using Word Macros

Macros are convenient for the user in that he can write down the key combinations he needs most often and then access them as many times as needed in a second. This makes it possible to simplify frequently used actions or combinations of them.

The work with fragments of text is arranged in a similar way, which makes it possible to raise its uniqueness.

• Visual Basic macro help

A way for programmers who know how to use Visual Basic how to cheat anti-plagiarism and other programs. Everything is very simple: after each word or symbol, depending on the volume of the text and the complexity of the task, a small dot of the 1st font is added.

Visually, it is almost impossible to see it. But in order to run this process for all words, you need to write a macro, and this will require knowledge of the basics of VB.

• Replacing Russian letters with Greek

Here's another interesting technique that not all copywriters use - many do not even know about its existence.

The fact is that the systems do not yet recognize the Greek symbols micron and omega, which successfully replace the letter “o”, because they look almost the same, but for anti-plagiarism programs this is a completely different symbol. And just as replacing one letter in a passport makes you a different person, replacing one letter in each word can make the text unique for search engines and anti-plagiarism programs.

Until 2007, Russian students used any sources when completing their theses and were not afraid that they would be accused of borrowing other people's texts. Now everything has changed, and absolutely all written works are checked for anti-plagiarism. If the percentage of uniqueness is below the norm, then the student is not allowed to defend.

This seems to be the right decision, if you do not face the verification process personally. An essential part of any work is citation. Some theses are even built to prove or disprove the work of some predecessor. What if it's a legal issue? How can it do without citations of laws? But any quote is on the Internet, and anti-plagiarism will underestimate the percentage, considering that you want to deceive the teacher. Let's explore and find solutions.

Does anti-plagiarism recognize quoting

There is an opinion that if a student draws up a quote correctly, then he has nothing to be afraid of - anti-plagiarism will see this and will not take the fragment into account when determining the overall result. In fact, everything is different:

• Antiplagiat.ru recognizes quotes, but still reduces uniqueness because of them;
• ETXT, Advego DC Finder do not even react to quotes, equating them with the rest of the text; the most popular Antiplagiarism.VUZ service only plans to distinguish quotes, but so far considers them plagiarism.

What is the bottom line? Correctly formatting a quote is important, but only to pass the test of the teacher, and not the “machine”. But we will still open this issue in the hope that someday the anti-plagiarism will learn to distinguish between quotes and the student's text.

How to quote correctly

In this matter, we rely on the rules of the latest versions of training manuals, according to which the citation is issued according to a certain algorithm:

1. Mandatory introductory construction before the quote. For example, “According to the historian Ivanov I.I.” or "The famous scientist Petrov P.P. claimed."
2. The quote itself, enclosed in quotation marks.
3. Square brackets, which indicate the serial number of the source in the bibliographic list, as well as the page number. For example, .

Using this algorithm, you will not be able to make quotes a unique text, but at least avoid the comments of teachers on the design.

But how then to pass the check for uniqueness, if the correct quoting does not help? Take advantage of our site!

Increasing uniqueness in the Antiplagius service

We can help students in two ways: professional rewriting and coding.

Of course, our specialists will not rewrite quotes, but they can make the rest of the test absolutely unique, and you will not be afraid of checking. We have access to all verification services, even the “closed” Antiplagiarism.VUZ, so we will check the work and send you a report. The cost of the service is 100 rubles per page, the deadline is no more than 3 days.