Zero resistance is not the only feature of superconductivity. One of the main differences between superconductors and ideal conductors is the Meissner effect, discovered by Walter Meissner and Robert Oksenfeld in 1933.

The Meissner effect consists in "pushing out" the magnetic field by the superconductor from the part of space it occupies. This is caused by the existence of undamped currents inside the superconductor, which create an internal magnetic field that is opposite to the applied external magnetic field and compensates for it.

When a superconductor is cooled, which is in an external constant magnetic field, at the moment of transition to the superconducting state, the magnetic field is completely displaced from its volume. This distinguishes a superconductor from an ideal conductor, in which, when the resistance drops to zero, the magnetic field induction in the volume must remain unchanged.

The absence of a magnetic field in the volume of the conductor allows us to conclude from the general laws of the magnetic field that only surface current exists in it. It is physically real and therefore occupies some thin layer near the surface. The magnetic field of the current destroys the external magnetic field inside the superconductor. In this respect, the superconductor behaves formally as an ideal diamagnet. However, it is not a diamagnet, because inside it, the magnetization is zero.

The Meissner effect was first explained by the brothers Fritz and Heinz London. They showed that in a superconductor the magnetic field penetrates to a fixed depth from the surface - the London depth of penetration of the magnetic field λ . For metals l~10 -2 µm.

Pure substances in which the phenomenon of superconductivity is observed are not numerous. More often, superconductivity occurs in alloys. For pure substances, the full Meissner effect takes place, while for alloys there is no complete expulsion of the magnetic field from the volume (partial Meissner effect). Substances that exhibit the full Meissner effect are called superconductors of the first kind , and the partial superconductors of the second kind .

Superconductors of the second kind in the volume have circular currents that create a magnetic field, which, however, does not fill the entire volume, but is distributed in it in the form of separate threads. As for the resistance, it is equal to zero, as in the superconductors of the first kind.

The transition of a substance to the superconducting state is accompanied by a change in its thermal properties. However, this change depends on the kind of superconductors under consideration. Thus, for type I superconductors in the absence of a magnetic field at the transition temperature T S the heat of the transition (absorption or release) vanishes, and consequently suffers a jump in heat capacity, which is characteristic of a phase transition of the ΙΙ kind. When the transition from the superconducting state to the normal state is carried out by changing the applied magnetic field, then heat must be absorbed (for example, if the sample is thermally insulated, then its temperature decreases). And this corresponds to a phase transition of the Ι order. For superconductors of the ΙΙ kind, the transition from the superconducting to the normal state under any conditions will be a phase transition of the ΙΙ kind.

The phenomenon of expulsion of the magnetic field can be observed in the experiment, which was called the "coffin of Mohammed." If a magnet is placed on the surface of a flat superconductor, then levitation can be observed - the magnet will hang at some distance from the surface without touching it. Even in fields with an induction of the order of 0.001 T, the magnet shifts upwards by a distance of the order of a centimeter. This is because the magnetic field is pushed out of the superconductor, so a magnet approaching the superconductor will "see" a magnet of the same polarity and exactly the same size - which will cause levitation.

The name of this experiment - "Mohammed's coffin" - is due to the fact that, according to legend, the coffin with the body of the prophet Mohammed hung in space without any support.

The first theoretical explanation of superconductivity was given in 1935 by Fritz and Heinz London. A more general theory was built in 1950 by L.D. Landau and V.L. Ginzburg. It has become widespread and is known as the Ginzburg-Landau theory. However, these theories were phenomenological in nature and did not reveal the detailed mechanisms of superconductivity. For the first time, superconductivity at the microscopic level was explained in 1957 in the work of American physicists John Bardeen, Leon Cooper and John Schrieffer. The central element of their theory, called the BCS theory, is the so-called Cooper pairs of electrons.

In 1933, the German physicist Walter Fritz Meissner, together with his colleague Robert Ochsenfeld, discovered the effect, which was later named after him. The Meissner effect lies in the fact that during the transition to the superconducting state, there is a complete displacement of the magnetic field from the volume of the conductor. This can be clearly observed with the help of the experiment, which was given the name "Mohammed's Coffin" (according to legend, the coffin of the Muslim prophet Mohammed hung in the air without physical support). In this article, we will talk about the Meissner Effect and its future and current practical applications.

In 1911, Heike Kamerling-Onnes made an important discovery - superconductivity. He proved that if some substances are cooled to a temperature of 20 K, they do not resist electric current. The low temperature “calms down” the random vibrations of the atoms, and the electricity meets no resistance.

After this discovery, a real race began to find substances that would not resist without cooling, for example, at ordinary room temperature. Such a superconductor will be able to transmit electricity over gigantic distances. The fact is that conventional power lines lose a significant amount of electric current, just because of the resistance. In the meantime, physicists are conducting their experiments with the help of cooling superconductors. And one of the most popular experiences is the demonstration of the Meissner Effect. There are many videos on the net showing this effect. We have posted one that best demonstrates this.

To demonstrate the experience of magnet levitation over a superconductor, we need to take high-temperature superconducting ceramics and a magnet. Ceramics are cooled with nitrogen to the level of superconductivity. A current is connected to it and a magnet is placed on top. In fields of 0.001 T, the magnet moves upward and levitates above the superconductor.

The effect is explained by the fact that when a substance passes into superconductivity, the magnetic field is pushed out of its volume.

How can the Meissner effect be applied in practice? Probably, every reader of this site has seen a lot of science fiction films in which cars hovered over the road. If it is possible to invent a substance that will turn into a superconductor at a temperature, say, not lower than +30, then this will no longer turn out to be science fiction.

But what about bullet trains that also hover over the railroad. Yes, they already exist. But unlike the Meissner Effect, there are other laws of physics at work: the repulsion of the unipolar sides of magnets. Unfortunately, the high cost of magnets does not allow wide dissemination of this technology. With the invention of a superconductor that doesn't need to be cooled, flying cars will become a reality.

In the meantime, the Meissner Effect has been adopted by magicians. We unearthed one of these representations for you on the net. The Exos troupe shows its tricks. No magic, just physics.

The beginning of the 20th century in physics can be called the era of extremely low temperatures. In 1908, the Dutch physicist Heike Kamerling-Onnes first obtained liquid helium, which has a temperature of only 4.2 degrees above absolute zero. And soon he managed to reach a temperature of less than one kelvin! For these achievements, Kamerling-Onnes was awarded the Nobel Prize in 1913. But he was not at all chasing records, he was interested in how substances change their properties at such low temperatures - in particular, he studied the change in the electrical resistance of metals. And then on April 8, 1911, something incredible happened: at a temperature just below the boiling point of liquid helium, the electrical resistance of mercury suddenly disappeared. No, it didn't just become very small, it turned out to be zero (as far as it was possible to measure it)! None of the theories that existed at that time predicted anything like this and could not explain it. The following year, a similar property was discovered in tin and lead, the latter conducting current without resistance and at temperatures even just above the boiling point of liquid helium. And by the 1950s and 1960s, NbTi and Nb 3 Sn materials were discovered, which are distinguished by the ability to maintain a superconducting state in powerful magnetic fields and when high currents flow. Alas, they still require cooling with expensive liquid helium.

1. Having installed a “flying car” with a filling of a superconductor, with linings of a melamine sponge impregnated with liquid nitrogen and a foil sheath, on a magnetic rail through a gasket of a pair of wooden rulers, pour liquid nitrogen into it, “freezing” the magnetic field into the superconductor.

2. After waiting for the superconductor to cool to a temperature below -180°C, carefully remove the rulers from under it. The “car” hovers stably, even if we positioned it not quite in the center of the rail.

The next great discovery in the field of superconductivity took place in 1986: Johannes Georg Bednorz and Karl Alexander Müller discovered that copper-barium-lanthanum co-oxide is superconductive at a very high (compared to the boiling point of liquid helium) temperature of 35 K. Already in the next In 1998, by replacing lanthanum with yttrium, superconductivity was achieved at a temperature of 93 K. Of course, by household standards, these are still quite low temperatures, -180 ° C, but the main thing is that they are above the threshold of 77 K - the boiling point of cheap liquid nitrogen. In addition to the critical temperature, which is huge by the standards of ordinary superconductors, unusually high values ​​of the critical magnetic field and current density are achievable for YBa2Cu3O7-x (0 ≤ x ≤ 0.65) and a number of other cuprates. Such a remarkable combination of parameters not only allowed a much wider use of superconductors in technology, but also made possible many interesting and spectacular experiments that can be done even at home.

We were unable to detect any voltage drop when passing a current of more than 5 A through the superconductor, which indicates zero electrical resistance. Well, at least about the resistance of less than 20 μOhm - the minimum that can be fixed by our device.

Which to choose

First you need to get a suitable superconductor. The discoverers of high-temperature superconductivity baked a mixture of oxides in a special oven, but for simple experiments, we recommend buying ready-made superconductors. They are available in the form of polycrystalline ceramics, textured ceramics, first and second generation superconducting tapes. Polycrystalline ceramics are inexpensive, but their parameters are far from record-breaking: already small magnetic fields and currents can destroy superconductivity. Tapes of the first generation also do not amaze with their parameters. Textured ceramic is a completely different matter, it has the best characteristics. But for recreational experiences, it is inconvenient, fragile, degrades over time, and most importantly, it is quite difficult to find it in the free market. But the tapes of the second generation turned out to be an ideal option for the maximum number of visual experiments. Only four companies in the world can produce this high-tech product, including the Russian SuperOx. And, what is very important, they are ready to sell their tapes, made on the basis of GdBa2Cu3O7-x, in quantities from one meter, which is just enough to conduct demonstrative scientific experiments.

The second-generation superconducting tape has a complex structure of many layers for various purposes. The thickness of some layers is measured in nanometers, so this is real nanotechnology.

Equal to zero

Our first experience is the measurement of the resistance of a superconductor. Is it really zero? It is pointless to measure it with an ordinary ohmmeter: it will show zero even when connected to a copper wire. Such small resistances are measured differently: a large current is passed through the conductor and the voltage drops across it are measured. As a current source, we took an ordinary alkaline battery, which, when short-circuited, gives about 5 A. At room temperature, both a meter of superconducting tape and a meter of copper wire show a resistance of several hundredths of an ohm. We cool the conductors with liquid nitrogen and immediately observe an interesting effect: even before we started the current, the voltmeter already showed about 1 mV. Apparently, this is a thermo-EMF, since in our circuit there are many different metals (copper, solder, steel "crocodiles") and temperature drops of hundreds of degrees (subtract this voltage in further measurements).

A thin disk magnet is great for creating a levitating platform over a superconductor. In the case of a snowflake superconductor, it is easily “pressed” in a horizontal position, and in the case of a square superconductor, it should be “frozen in”.

And now we pass the current through the cooled copper: the same wire shows resistance already in only thousandths of an ohm. But what about superconducting tape? We connect the battery, the ammeter needle instantly rushes to the opposite edge of the scale, but the voltmeter does not change its readings even by a tenth of a millivolt. The resistance of the tape in liquid nitrogen is exactly zero.

As a cuvette for a superconducting assembly in the form of a snowflake, the cap from a five-liter bottle of water was excellent. A piece of melamine sponge should be used as a heat-insulating stand under the lid. It is necessary to add nitrogen no more than once every ten minutes.

Aircrafts

Now let's move on to the interaction of a superconductor and a magnetic field. Small fields are generally pushed out of the superconductor, while stronger ones penetrate it not in a continuous stream, but in the form of separate "jets". In addition, if we move a magnet near a superconductor, then currents are induced in the latter, and their field tends to bring the magnet back. All this makes superconducting or, as it is also called, quantum levitation possible: a magnet or superconductor can hang in the air, stably held by a magnetic field. To verify this, a small rare earth magnet and a piece of superconducting tape are sufficient. If you have at least a meter of tape and larger neodymium magnets (we used a 40 x 5 mm disc and a 25 x 25 mm cylinder), then you can make this levitation quite spectacular by lifting an additional weight into the air.

First of all, you need to cut the tape into pieces and fasten them into a bag of sufficient area and thickness. You can also fasten them with superglue, but this is not very reliable, so it is better to solder them with an ordinary low-power soldering iron with ordinary tin-lead solder. Based on the results of our experiments, two package options can be recommended. The first is a square with a side of three tape widths (36 x 36 mm) of eight layers, where in each subsequent layer the tapes are laid perpendicular to the tapes of the previous layer. The second is an eight-ray "snowflake" of 24 pieces of tape 40 mm long, stacked on top of each other so that each next piece is rotated 45 degrees relative to the previous one and crosses it in the middle. The first option is a little easier to manufacture, much more compact and stronger, but the second one provides better stabilization of the magnet and economical nitrogen consumption due to its absorption into the wide gaps between the sheets.

A superconductor can hang not only above a magnet, but also below it, and indeed in any position relative to the magnet. As well as the magnet does not have to hang exactly above the superconductor.

By the way, stabilization should be mentioned separately. If you freeze a superconductor, and then just bring a magnet to it, then the magnet will not hang - it will fall away from the superconductor. To stabilize the magnet, we need to force the field into the superconductor. This can be done in two ways: "freezing" and "pressing". In the first case, we place a magnet over a warm superconductor on a special support, then pour liquid nitrogen and remove the support. This method works great with the "square", it will also work for single-crystal ceramics, if you can find it. With the "snowflake" method also works, albeit a little worse. The second method assumes that you force the magnet closer to the already cooled superconductor until it captures the field. With a single crystal of ceramics, this method almost does not work: too much effort is needed. But with our "snowflake" it works great, allowing you to stably hang the magnet in different positions (with the "square" too, but the position of the magnet cannot be made arbitrary).

To see quantum levitation, even a small piece of superconducting tape is enough. True, only a small magnet can be kept in the air and at a low altitude.

Free float

And now the magnet is already hanging one and a half centimeters above the superconductor, recalling Clarke's third law: "Any sufficiently advanced technology is indistinguishable from magic." Why not make the picture even more magical by placing a candle on a magnet? Perfect option for a romantic quantum mechanical dinner! True, there are a couple of things to consider. Firstly, candles in a metal sleeve tend to slide to the edge of the magnet disc. To get rid of this problem, you can use a candlestick-stand in the form of a long screw. The second problem is the boiling off of nitrogen. If you try to add it just like that, then the steam coming from the thermos extinguishes the candle, so it is better to use a wide funnel.

An eight-layer package of superconducting tapes can easily hold a very massive magnet at a height of 1 cm or more. Increasing the package thickness will increase the retained mass and flight altitude. But above a few centimeters, the magnet in any case will not rise.

By the way, where exactly to add nitrogen? What container should the superconductor be placed in? Two options turned out to be the easiest: a cuvette made of foil folded into several layers and, in the case of a “snowflake”, a cap from a five-liter bottle of water. In both cases, the container is placed on a piece of melamine sponge. This sponge is sold in supermarkets and is designed for cleaning, it is a good thermal insulator that can withstand cryogenic temperatures perfectly.

In general, liquid nitrogen is quite safe, but you still need to be careful when using it. It is also very important not to close the containers with it hermetically, otherwise the evaporation will increase the pressure in them and they may explode! Liquid nitrogen can be stored and transported in ordinary steel thermoses. In our experience, it lasts at least two days in a two-liter thermos, and even longer in a three-liter thermos. For one day of home experiments, depending on their intensity, it takes from one to three liters of liquid nitrogen. It is inexpensive - about 30-50 rubles per liter.

Finally, we decided to assemble a rail of magnets and launch a “flying car” along it with a superconductor filling, with linings of melanin sponge soaked in liquid nitrogen and a foil shell. There was no problem with the straight rail: by taking 20 x 10 x 5 mm magnets and laying them on a sheet of iron like bricks in a wall (horizontal wall, since we need a horizontal direction of the magnetic field), it is easy to assemble a rail of any length. It is only necessary to lubricate the ends of the magnets with glue so that they do not move apart, but remain tightly compressed, without gaps. A superconductor slides along such a rail without any friction. It is even more interesting to assemble the rail in the form of a ring. Alas, here one cannot do without gaps between the magnets, and at each gap the superconductor slows down a little ... Nevertheless, a good push is quite enough for a couple of laps. If you wish, you can try to grind the magnets and make a special guide for their installation - then an annular rail without joints is also possible.

The editors express their gratitude to the SuperOx company and personally to its leader Andrei Petrovich Vavilov for the superconductors provided, as well as to the neodim.org online store for the magnets provided.

A magnet in a superconducting cup doused with liquid nitrogen floats like Mahomet's Coffin...

The legendary "Coffin of Mohammed" fit into the "scientific" picture of the world in 1933 as the "Meissner Effect": located above the superconductor, the magnet rises and begins to levitate. scientific fact. And the “scientific picture” (that is, the myth of those who explain scientific facts) is as follows: “a constant, not too strong magnetic field is pushed out of a superconducting sample” - and everything immediately became clear and understandable. But those who build their own picture of the world are not forbidden to think that they are dealing with levitation. Who likes what. By the way, those who are not blinded by the “scientific picture of the world” are more productive in science. This is what we'll talk about now.

And the case is God, the inventor ...

In general, it was not easy to observe the "Meissner-Mohammed effect": liquid helium was needed. But in September 1986, when G. Bednorz and A. Muller reported that high-temperature superconductivity is possible in ceramic samples based on Ba-La-Cu-O. This completely contradicted the “scientific picture of the world” and the guys would have been quickly dismissed with this, but it was the “Coffin of Mohammed” that helped: the phenomenon of superconductivity could now be freely demonstrated to anyone and anywhere, and so all other explanations of the “scientific picture of the world” contradicted even more , then superconductivity at high temperatures was quickly recognized, and these guys received their Nobel Prize the very next year! - Compare with the founder of the theory of superconductivity - Pyotr Kapitsa, who discovered superconductivity fifty years ago, and received the Nobel Prize only eight years earlier than these guys ...

Before proceeding, check out Mohammed-Meissner's levitation in the following video.

Before the start of the experiment, a superconductor made of special ceramics ( YBa 2 Cu 3 O 7-x) are cooled by pouring liquid nitrogen on it so that it acquires its "magic" properties.

In 1992, at the University of Tampere (Finland), Russian scientist Evgeny Podkletnov conducted research on the properties of screening with superconducting ceramics of various electromagnetic fields. However, during the experiments, quite by accident, an effect was discovered that does not fit into the framework of classical physics. Podkletnov called it "gravity screening" and, with a co-author, published a preliminary report.

Podkletnov rotated a "frostbitten" superconducting disk in an electromagnetic field. And then one day, someone in the laboratory lit a pipe and the smoke that fell into the area above the rotating disk suddenly rushed up! Those. smoke, over the disc was losing weight! Measurements with objects made of other materials confirmed the conjecture, not perpendicular, but generally opposite to the "scientific picture of the world": it turned out that it was possible to protect oneself from the "all-penetrating" force of universal gravitation!
But, in contrast to the visual effect of the Meissner-Mohammed here, the visibility was much lower: the weight loss was a maximum of about 2%.

The report on the experiment was completed by Evgeny Podkletnov in January 1995 and sent to D. Modanese, who asked him to give the name necessary for citation in his work “Theoretical analysis ...” of the Los Alamos preprint library that appeared in May (hep-th / 9505094) and the leading theoretical basis for the experiments. This is how the MSU identifier appeared - chem 95 (or in the transcription of Moscow State University - chemistry 95).

Podkletnov's article was rejected by several scientific journals until, finally, it was accepted for publication (in October 1995) in the prestigious Journal of Applied Physics, published in England (The Journal of Physics-D: Applied Physics, a publication of England's Institute Physics). It seemed that the discovery was about to secure, if not recognition, then at least the interest of the scientific world. However, it didn't work out that way.

The first article was published by publications far from science, who do not observe the purity of the "scientific picture of the world" - today they will write about green men and flying saucers, and tomorrow about antigravity - it would be interesting to the reader, no matter whether it fits or does not fit into the "scientific" picture of the world.
A representative of the University of Tampere stated that anti-gravity issues were not dealt with within the walls of this institution. The co-authors of the article Levit and Vuorinen, who provided technical support, fearing a scandal, disowned the laurels of the discoverers, and Evgeny Podkletnov was forced to remove the prepared text in the journal.

However, the curiosity of scientists won. In 1997, a NASA team in Huntsville, Alabama, repeated the Podkletny experiment using their setup. A static test (without rotation of the HTSC disk) did not confirm the effect of gravity screening.

However, it could not be otherwise: The previously mentioned Italian theoretical physicist Giovanni Modanese, in his report presented in October 1997 at the 48th Congress of the IAF (International Federation of Astronautics), held in Turin, noted, supported by theory, the need to use a two-layer ceramic HTSC disk to obtain the effect with different critical temperatures of the layers (However, Podkletnov also wrote about this). This work was further developed in the article "Gravitational Anomalies by HTC superconductors: a 1999 Theoretical Status Report.". By the way, an interesting conclusion is also presented there, about the impossibility of building aircraft using the effect of "gravity shielding", although the theoretical possibility of building gravity elevators - "lifts

Gravity variations were soon discovered by Chinese scientists. in the course of measuring the change in gravity during a total solar eclipse, very little, but indirectly, confirms the possibility of "screening gravity". This is how the “scientific” picture of the world began to change; create a new myth.

With this in mind, the following questions are worth asking:
- and where were the notorious "scientific predictions" - why didn't science predict the anti-gravity effect?
- Why does Chance decide everything? Moreover, armed with a scientific picture of the world, scientists, even after they were chewed and put in their mouths, could not repeat the experiment? What kind of case is this, which comes into one head, and simply cannot be hammered into the other?

Russian fighters against pseudoscience distinguished themselves even more abruptly, which in our country until the end of his days was led by the militant materialist Yevgeny Ginzburg. Professor from the Institute of Physical Problems. P.L. Kapitsa RAS Maxim Kagan stated:
Podkletnov's experiments look rather strange. At two recent international conferences on superconductivity in Boston (USA) and Dresden (Germany), where I participated, his experiments were not discussed. It is not widely known to specialists. Einstein's equations, in principle, allow the interaction of electromagnetic and gravitational fields. But in order for such an interaction to become noticeable, colossal electromagnetic energy is needed, comparable to Einstein's rest energy. We need electric currents many orders of magnitude higher than those that are achievable in modern laboratory conditions. Therefore, we have no real experimental possibilities to change the gravitational interaction.
- What about NASA?
-NASA has a lot of money for R&D. They test many ideas. They even check ideas that are very dubious, but attractive to a wide audience ... We study the real properties of superconductors ....»

- So here it is: we are realists-materialists, and there semi-literate Americans can throw money right and left to please lovers of the occult and other pseudoscience, this, they say, is their business.

Those who wish can learn more about the work.

Podkletnov-Modanese anti-gravity gun

Schematic of the "Anti-Gravity Gun"

He trampled on realist compatriots Podkletnov to the fullest. Together with the theorist Modanese, he created, figuratively speaking, an anti-gravity gun.

In the preface to the publication, Podkletnov wrote the following: “I do not publish works on gravity in Russian, so as not to embarrass my colleagues and the administration. There are enough other problems in our country, and no one is interested in science. You can freely use the text of my publications in a competent translation ...
Please do not associate these works with flying saucers and aliens, not because they do not exist, but because it causes a smile and no one wants to finance ridiculous projects. My work on gravity is very serious physics and carefully performed experiments. We operate with the possibility of modifying the local gravitational field based on the theory of vacuum energy fluctuations and the theory of quantum gravity».

And so, the work of Podkletnov, unlike the Russian know-it-alls, did not seem funny, for example, to the Boeing company, which launched extensive research on this “funny” topic.

And Podkletnov and Modanese created a device that allows you to control gravity, more precisely - antigravity . (Report on the website of the Los Alamos Laboratory is available). " Controlled gravitational impulse" allows you to provide a short-term shock effect on any objects at a distance of tens and hundreds of kilometers, which makes it possible to create new systems for moving in space, communication systems, etc.» . In the text of the article, this is not evident, but you should pay attention to the fact that this impulse repels rather than attracts objects. Apparently, given that the term "gravity shielding" is not appropriate in this case, only the fact that the word "antigravity" is "taboo" for science, forces authors to avoid using it in the text.

At a distance of 6 to 150 meters from the installation, in another building, measuring

Vacuum flask with pendulum

devices that are ordinary pendulums in vacuum flasks.

Various materials were used to make pendulum spheres: metal, glass, ceramics, wood, rubber, plastic. The installation was separated from the measuring instruments located at a distance of 6 m by a 30 cm brick wall and a steel sheet 1x1.2x0.025 m. The measuring systems located at a distance of 150 m were additionally enclosed by a brick wall 0.8 m thick. no more than five pendulums located on the same line were used. All their testimonies matched.
A condenser microphone was used to characterize the gravitational pulse - especially its frequency spectrum. The microphone was connected to a computer and was in a plastic spherical box filled with porous rubber. It was placed along the aiming line after the glass cylinders and had the possibility of various orientations to the direction of the discharge axis.
The impulse launched the pendulum, which was observed visually. The delay time of the beginning of the pendulum oscillations was very small and was not measured. Then the natural oscillations gradually faded. Technically, it was possible to compare the signal from the discharge and the response received from the microphone, which has a typical behavior of an ideal pulse:
It should be noted that no signal was detected outside the area of ​​the sight and it seems that the "beam of power" had well-defined boundaries.

The dependence of the pulse strength (the angle of deflection of the pendulum) was found not only on the discharge voltage, but also on the type of emitter.

The temperature of the pendulums did not change during the experiments. The force acting on the pendulums did not depend on the material and was proportional only to the mass of the sample (in the experiment from 10 to 50 grams). Pendulums of different masses showed equal deflection at constant voltage. This has been proven by a large number of measurements. Deviations in the strength of the gravitational impulse were also found within the projection area of ​​the emitter. These deviations (up to 12–15%) are attributed by the authors to possible inhomogeneities of the emitter.

Impulse measurements, in the range of 3-6 m, 150 m (and 1200 m) from the experimental setup, gave, within the experimental errors, identical results. Since these measurement points, apart from air, were also separated by a thick brick wall, it can be assumed that the gravity impulse was not absorbed by the medium (or the losses were insignificant). The mechanical energy "absorbed" by each pendulum depended on the discharge voltage. Indirect evidence that the observed effect is of a gravitational nature is the established fact of the inefficiency of electromagnetic shielding. With the gravitational effect, the acceleration of any body experiencing impulsive action should, in principle, be independent of the mass of the body.

P.S.

I'm a skeptic and don't really believe this is even possible. The fact is that there are completely ridiculous explanations for this phenomenon, including in physics journals, such as that they have such developed back muscles. Why not buttocks?!

And like this: the Boeing company launched extensive research on this “ridiculous” topic ... And is it funny now to think that someone will have a gravitational weapon capable of, say, producing an earthquake .

But what about science? It's time to understand: science does not invent or discover anything. People discover and invent, discover new phenomena, discover new patterns, and this is already becoming a science, using which other people can make predictions, but only within the framework of those models and those conditions for which open models are correct, but go beyond these models science itself cannot.

For example, what is better than the “scientific picture of the world”, the one that at the beginning, than the one that they began to use later? Yes, only convenience, but what does both have to do with reality? Same! And if Carnot substantiated the limits of the efficiency of a heat engine using the concept of caloric, then, therefore, this “picture of the world” is no worse than the one that these were balls-molecules knocking against the walls of a cylinder. Why is one model better than another? Nothing! Each model is correct in some sense, within some limits.

The question for science is on the agenda: to explain how yogis, sitting on their ass, jump up half a meter?!

GD Star Rating
a WordPress rating system

Mahomet's coffin, 5.0 out of 5 based on 2 ratings

When a superconductor is cooled in an external constant magnetic field, at the moment of transition to the superconducting state, the magnetic field is completely displaced from its volume. This distinguishes a superconductor from an ideal conductor, in which, when the resistance drops to zero, the magnetic field induction in the volume must remain unchanged.

The absence of a magnetic field in the volume of the conductor allows us to conclude from the general laws of the magnetic field that only surface current exists in it. It is physically real and therefore occupies some thin layer near the surface. The magnetic field of the current destroys the external magnetic field inside the superconductor. In this respect, the superconductor behaves formally as an ideal diamagnet. However, it is not a diamagnet, since the magnetization inside it is zero.

The Meissner effect cannot be explained by infinite conductivity alone. For the first time, its nature was explained by the brothers Fritz and Heinz London using the London equation. They showed that in a superconductor the field penetrates to a fixed depth from the surface - the London depth of penetration of the magnetic field λ (\displaystyle \lambda ). For metals λ ∼ 10 − 2 (\displaystyle \lambda \sim 10^(-2))µm.

Type I and II superconductors

Pure substances in which the phenomenon of superconductivity is observed are not numerous. More often, superconductivity occurs in alloys. For pure substances, the full Meissner effect takes place, while for alloys there is no complete expulsion of the magnetic field from the volume (partial Meissner effect). Substances that exhibit the full Meissner effect are called type I superconductors, and partial ones are called type II superconductors. However, it is worth noting that in low magnetic fields all types of superconductors exhibit the full Meissner effect.

Superconductors of the second kind in the volume have circular currents that create a magnetic field, which, however, does not fill the entire volume, but is distributed in it in the form of separate threads of Abrikosov vortices. As for the resistance, it is equal to zero, as in the superconductors of the first kind, although the movement of vortices under the action of the current current creates effective resistance in the form of dissipative losses for the movement of the magnetic flux inside the superconductor, which is avoided by introducing defects into the structure of the superconductor - pinning centers, for which vortices "cling".

"Coffin of Mohammed"

"Mahomet's Coffin" - an experiment demonstrating the Meissner effect in superconductors.

origin of name

According to legend, the coffin with the body of the prophet Mohammed hung in space without any support, so this experiment is called the "Coffin of Mohammed."

Statement of experience

Superconductivity exists only at low temperatures (in HTSC ceramics - at temperatures below 150), so the substance is pre-cooled, for example, with liquid nitrogen. Next, the magnet is placed on the surface of a flat superconductor. Even in the fields

The phenomenon was first observed in 1933 by the German physicists Meisner and Oksenfeld. The Meissner effect is based on the phenomenon of complete displacement of the magnetic field from the material during the transition to the superconducting state. The explanation of the effect is related to the strictly zero value of the electrical resistance of superconductors. The penetration of a magnetic field into an ordinary conductor is associated with a change in the magnetic flux, which, in turn, creates an EMF of induction and induced currents that prevent a change in the magnetic flux.

The magnetic field penetrates the superconductor to a depth, the displacement of the magnetic field from the superconductor is determined by a constant called the London constant:

Rice. 3.17 Schematic of the Meissner effect.

The figure shows the lines of the magnetic field and their displacement from a superconductor at a temperature below the critical one.

When the temperature passes through the critical value, the magnetic field in the superconductor changes sharply, which leads to the appearance of an EMF pulse in the inductor.

Rice. 3.18 A sensor that implements the Meissner effect.

This phenomenon is used to measure ultraweak magnetic fields, to create cryotrons(switching devices).

Rice. 3.19 Design and designation of the cryotron.

Structurally, the cryotron consists of two superconductors. A coil of niobium is wound around the tantalum conductor, through which the control current flows. With an increase in the control current, the magnetic field strength increases, and tantalum passes from the state of superconductivity to the usual state. In this case, the conductivity of the tantalum conductor changes sharply, and the operating current in the circuit practically disappears. On the basis of cryotrons, for example, controlled valves are created.

Magnet levitates over liquid nitrogen-cooled superconductor

Meissner effect- complete displacement of the magnetic field from the material during the transition to the superconducting state (if the field induction does not exceed the critical value). The phenomenon was first observed in 1933 by the German physicists Meisner and Oksenfeld.

Superconductivity is the property of some materials to have strictly zero electrical resistance when they reach a temperature below a certain value (the electrical resistance does not become close to zero, but disappears completely). There are several dozens of pure elements, alloys and ceramics that pass into the superconducting state. Superconductivity is not only the absence of resistance, it is also a definite response to an external magnetic field. The Meissner effect is that a constant, not too strong, magnetic field is pushed out of a superconducting sample. In the thickness of the superconductor, the magnetic field is weakened to zero, superconductivity and magnetism can be called, as it were, opposite properties.

Kent Hovind in his theory suggests that before the Great Flood, the planet Earth was surrounded by a large layer of water, consisting of ice particles, which were held in orbit above the atmosphere by the Meissner effect.

This water shell served as protection from solar radiation and ensured uniform distribution of heat on the Earth's surface.

Illustrative Experience

A very spectacular experience demonstrating the presence of the Meissner effect is shown in the photograph: a permanent magnet hovers over a superconducting cup. For the first time, such an experiment was carried out by the Soviet physicist V.K. Arkadiev in 1945.

Superconductivity exists only at low temperatures (high-temperature superconductor ceramics exists at temperatures of the order of 150 K), so the substance is pre-cooled, for example, with liquid nitrogen. Next, the magnet is placed on the surface of a flat superconductor. Even in fields of 0.001 T, the magnet shifts upwards by a distance of the order of a centimeter. With an increase in the field up to the critical one, the magnet rises higher and higher.

Explanation

One of the properties of superconductors of the second kind is the expulsion of the magnetic field from the region of the superconducting phase. Starting from the immobile superconductor, the magnet floats itself and continues to soar until external conditions take the superconductor out of the superconducting phase. As a result of this effect, a magnet approaching a superconductor will "see" a magnet of opposite polarity of exactly the same size, which causes levitation.

An even more important property of a superconductor than zero electrical resistance is the so-called Meissner effect, which consists in the displacement of a constant magnetic field from a superconductor. From this experimental observation, a conclusion is made about the existence of undamped currents inside the superconductor, which create an internal magnetic field opposite to the external, applied magnetic field and compensating it.

A sufficiently strong magnetic field at a given temperature destroys the superconducting state of matter. A magnetic field with strength H c , which at a given temperature causes the transition of a substance from a superconducting state to a normal one, is called a critical field. As the temperature of the superconductor decreases, the value of H c increases. The temperature dependence of the critical field is described with good accuracy by the expression

where is the critical field at zero temperature. Superconductivity also disappears when an electric current is passed through a superconductor with a density greater than the critical one, since it creates a magnetic field greater than the critical one.

The destruction of the superconducting state under the action of a magnetic field is different for type I and type II superconductors. For type II superconductors, there are 2 values ​​of the critical field: H c1 at which the magnetic field penetrates the superconductor in the form of Abrikosov vortices and H c2 - at which the superconductivity disappears.

isotopic effect

The isotopic effect in superconductors is that the temperatures T c are inversely proportional to the square roots of the atomic masses of the isotopes of the same superconducting element. As a result, monoisotope preparations differ somewhat in critical temperatures from the natural mixture and from each other.

London moment

A rotating superconductor generates a magnetic field precisely aligned with the axis of rotation, the resulting magnetic moment is called the "London moment". It was used, in particular, in the scientific satellite "Gravity Probe B", where the magnetic fields of four superconducting gyroscopes were measured to determine their axis of rotation. Since the rotors of gyroscopes were almost perfectly smooth spheres, using the London moment was one of the few ways to determine their axis of rotation.

Applications of superconductivity

Significant progress has been made in obtaining high-temperature superconductivity. On the basis of cermets, for example, the composition YBa 2 Cu 3 O x , substances have been obtained for which the temperature T c of the transition to the superconducting state exceeds 77 K (the liquefaction temperature of nitrogen). Unfortunately, almost all high-temperature superconductors are not technologically advanced (brittle, do not have stable properties, etc.), as a result of which superconductors based on niobium alloys are still used in technology.

The phenomenon of superconductivity is used to obtain strong magnetic fields (for example, in cyclotrons), since there are no heat losses during the passage of strong currents through the superconductor that create strong magnetic fields. However, due to the fact that the magnetic field destroys the state of superconductivity, so-called magnetic fields are used to obtain strong magnetic fields. superconductors of the second kind, in which the coexistence of superconductivity and magnetic field is possible. In such superconductors, the magnetic field causes the appearance of thin threads of a normal metal penetrating the sample, each of which carries a quantum of magnetic flux (Abrikosov vortices). The substance between the threads remains superconducting. Since there is no full Meissner effect in a type II superconductor, superconductivity exists up to much higher values ​​of the magnetic field H c 2 . In technology, the following superconductors are mainly used:

There are photon detectors based on superconductors. Some use the presence of a critical current, they also use the Josephson effect, Andreev reflection, etc. Thus, there are superconducting single-photon detectors (SSPD) for detecting single photons in the IR range, which have a number of advantages over detectors of a similar range (PMT, etc.), using other methods of registration .

Comparative characteristics of the most common IR detectors based on non-superconductivity properties (the first four), as well as superconducting detectors (the last three):

Type of detector	Maximum counting rate, s −1	Quantum efficiency, %	, c −1	NEP Tue
InGaAs PFD5W1KSF APS (Fujitsu)
R5509-43 PMT (Hamamatsu)
Si APD SPCM-AQR-16 (EG\&G)
Mepsicron II (Quantar)
			less than 1 10 -3	less than 1 10 -19
			less than 1 10 -3

Vortices in type II superconductors can be used as memory cells. Some magnetic solitons have already found similar applications. There are also more complex two- and three-dimensional magnetic solitons, reminiscent of vortices in liquids, only the role of streamlines in them is played by lines along which elementary magnets (domains) line up.

The absence of heating losses during the passage of direct current through a superconductor makes the use of superconducting cables for the delivery of electricity attractive, since a single thin underground cable is able to transmit power, which in the traditional method requires the creation of a power line circuit with several cables of much greater thickness. Problems that prevent widespread use are the cost of cables and their maintenance - liquid nitrogen must be constantly pumped through superconducting lines. The first commercial superconducting transmission line was commissioned by American Superconductor on Long Island in New York in late June 2008. Power systems of South Korea are going to create by 2015 superconducting transmission lines with a total length of 3000 km.

An important application is found in miniature superconducting ring devices - SQUIDs, whose operation is based on the relationship between changes in magnetic flux and voltage. They are part of supersensitive magnetometers that measure the Earth's magnetic field and are also used in medicine to obtain magnetograms of various organs.

Superconductors are also used in maglevs.

The phenomenon of the dependence of the temperature of the transition to the superconducting state on the magnitude of the magnetic field is used in cryotrons-controlled resistances.

The random movement of the atoms of the conductor prevents the passage of electric current. The resistance of a conductor decreases with decreasing temperature. With a further decrease in the temperature of the conductor, a complete decrease in resistance and the phenomenon of superconductivity are observed.

At a certain temperature (close to 0 oK), the resistance of the conductor drops sharply to zero. This phenomenon is called superconductivity. However, another phenomenon is also observed in superconductors - the Meissner effect. Conductors in the superconducting state exhibit an unusual property. The magnetic field is completely displaced from the bulk of the superconductor.

Displacement of a magnetic field by a superconductor.

A conductor in a superconducting state, in contrast to an ideal conductor, behaves like a diamagnet. The external magnetic field is displaced from the bulk of the superconductor. Then if you place a magnet over a superconductor, the magnet hangs in the air.

The occurrence of this effect is due to the fact that when a superconductor is introduced into a magnetic field, eddy currents of induction arise in it, the magnetic field of which completely compensates for the external field (as in any diamagnet). But the induced magnetic field itself also creates eddy currents, the direction of which is opposite to the induction currents in direction and equal in magnitude. As a result, both the magnetic field and the current are absent in the bulk of the superconductor. The volume of the superconductor is shielded by a thin near-surface layer - the skin layer - through whose thickness (of the order of 10-7-10-8 m) the magnetic field penetrates and in which its compensation takes place.

a- a normal conductor with non-zero resistance at any temperature (1) is introduced into a magnetic field. In accordance with the law of electromagnetic induction, currents arise that resist the penetration of a magnetic field into the metal (2). However, if the resistance is different from zero, they quickly decay. The magnetic field penetrates a normal metal sample and is practically uniform (3);

b- from the normal state at a temperature above T c There are two ways: First, when the temperature is lowered, the sample becomes superconducting, then a magnetic field can be applied, which is pushed out of the sample. Second: first apply a magnetic field that will penetrate the sample, and then lower the temperature, then the field will be pushed out during the transition. Turning off the magnetic field gives the same picture;

in- if there were no Meissner effect, the conductor without resistance would behave differently. Upon transition to a state without resistance in a magnetic field, it would retain the magnetic field and would retain it even when the external magnetic field was removed. It would be possible to demagnetize such a magnet only by raising the temperature. This behavior, however, is not observed experimentally.