X-ray fluorescence analysis (XRF) is one of the most objective and adequate methods for studying the composition of a substance, since it is direct. The object under study is subjected to an exciting action - it can be a stream of electrons, protons, x-rays or gamma radiation with energy sufficient to transfer the atoms of the sample into an excited state. The excitation energy is such that when atoms go to the ground state, fluorescence occurs in the X-ray range. The spectral composition of this radiation uniquely corresponds to the elemental composition of the object. Apparatus for spectral analysis (spectrometers) in one way or another decompose fluorescent radiation into a spectrum, which is studied and analyzed using a methodological and mathematical apparatus.

The physical foundations of the method were developed in the first half of the 20th century. In the process of developing the theory and practice of the XRF method, its application areas covered almost all aspects of human activity: science, technology, agriculture. It is needed wherever it is required to quickly and accurately determine the chemical composition of a substance. It is also important that the object does not suffer from exposure to X-rays, which made the use of the method indispensable in art history, forensic science, and expertise.

However, despite the high demand for the XRF method, its application for a long time remained available only to the laboratories of large and wealthy enterprises and universities. The fact is that almost until the end of the last century, the development of the XRF hardware base followed the path of increasing the power of the spectrum excitation source: an X-ray tube, a radioactive isotope, a linear accelerator, a synchrotron. For example, the weight of only a high-voltage power source for an X-ray tube with a power of several thousand watts (typical power for such devices) was tens and hundreds of kilograms. Such a powerful X-ray flux required reliable biological protection; the generated heat had to be removed using water cooling. Thus, the spectrometer was a bulky unit, consuming a lot of energy and requiring a separate room, as well as qualified personnel for operation and maintenance. The price of such a device reached many hundreds of thousands of dollars, which, with high operating costs, made the device inaccessible to laboratories of small and medium-sized enterprises. In addition, due to the complexity and high cost, the number of manufactured devices was not enough to meet demand.

Obviously, to introduce the XFA method into wide analytical practice, a fundamentally different approach is needed. The new approach is based on the theoretical and experimental work of K. Anisovich and colleagues. The works are devoted to the calculation of luminosity and energy resolution for the main schemes of crystal-diffraction spectrometers. The results of theoretical calculations, confirmed experimentally, exceeded all expectations. It turned out that with a correctly calculated ratio of distances between the circuit elements, the total aperture ratio of spectrometers made according to an optimized X-ray optical scheme (the so-called aperture scheme) exceeds the overall aperture ratio of traditional spectrometers by 2-3 orders of magnitude. In practice, this meant that in order to obtain analytical characteristics comparable to those of commonly used high-power stationary spectrometers, an X-ray source hundreds of times less powerful was sufficient. desktop device, devoid of the disadvantages of bulky and expensive installations. It must be said that the correctly selected ratio of distances and angles of the X-ray optical scheme made it possible to level out another drawback of classical crystal diffraction devices - a strong dependence of readings on the inaccuracy of the sample setting. But most importantly, it became possible to start serial production of inexpensive X-ray crystal diffraction spectrometers accessible to small laboratories. In 1989 K.V. Anisovich founded and headed NPO "SPEKTRON", whose main goal was to meet the huge demand for X-ray spectrometers available to the mass user. It was this ambitious requirement - the introduction of XRF into mass analytical practice - that became the corporate slogan of the enterprise, the idea to which all its activities, starting with the smallest things, were subordinated.

Page 1 - 1 of 2
Home | Previous | 1

ISKROLINE 100– modern desktop emission spectrometer for elemental analysis of metals and alloys. The device is designed for fast and accurate spectral analysis of metals and alloys with various bases (Fe, Al, Cu, Zn, Pb, Sn, Sb, Ni, Ti, Co, Mg). Any spectral lines are available in the range of 174 - 441 nm (including phosphorus, sulfur and carbon lines) with a resolution of 0.02-0.04 nm. This spectrometer allows you to solve most analytical problems in the metallurgical, foundry, engineering and other industries, namely: analysis of various steels and cast irons (including phosphorus, sulfur and carbon), aluminum and copper alloys, lead, zinc and other non-ferrous alloys and metals .

"Grade" for an unlimited number of steel and alloy grades, the ability to adjust and add grades. The device meets the requirements of GOST for methods of spectral analysis. The accuracy of the analysis exceeds the requirements of GOST 18895-97 by 2-10 times. Dimensions of the device (WxDxH): 440 mm x 495 mm x 175 mm Weight, no more than 80 kg Certificate of initial verification of the device and training of employees are included in the standard delivery. Warranty 1 year.

Emission spectrometers "Iscroline" are included in the State Register of Measuring Instruments of Russia, Belarus, Kazakhstan and Uzbekistan.

Optical emission spectrometer ISKROLINE 300/350

ISKROLINE 300/350– a modern laboratory-class emission spectrometer for accurate analysis of metals and alloys with various bases (Fe, Al, Cu, Zn, Pb, Sb, Sn, Ni, Ti, Co, Mg). Any spectral lines are available in the range of 174 - 915 nm (including lines of phosphorus, sulfur, carbon, nitrogen, hydrogen, oxygen, alkaline and alkaline earth elements) with a resolution of 0.007-0.01 nm (in the range of 174-415 nm) and 0.02-0.03 nm (in the range of 415-915 nm). The device meets the requirements of GOST for methods of spectral analysis. The accuracy of the analysis exceeds the requirements of GOST 18895-97 by 2-10 times.

The ISCROLINE 300/350 performs more complex tasks that small-sized spectrometers (all on the market, regardless of manufacturer) do worse. This is, on the one hand, a quantitative analysis of pure and ultrapure metals (pure copper, aluminum, lead, etc.), and on the other hand, the determination of the chemical composition of complex and supercomplex alloys.

Iskroline 300 is made in the form of a table and is designed to work while sitting. The sparkline 350 is designed for standing work. This is an alternative version of Iskroline 300. Spectrometers differ only in size and appearance. All technical and metrological characteristics of the instruments are identical. Dimensions Iscroline 300 (L x W x H, mm): 1200 x 1100 x 920. Dimensions Iscroline 350 (L x W x H, mm): 970 x 840 x 1030

Emission spectrometers "Iscroline" are included in the State Register of Measuring Instruments of Russia, Belarus, Kazakhstan and Uzbekistan.

SPAS-01 - arc atomic emission spectrometer

SPAS-01 is a classic arc spectrometer with discharge in air and processing of the obtained results on a computer. Designed for express analysis of the elemental composition of powder materials (including soils, geological samples, etc.), metals and alloys, as well as analysis of non-conductive samples.

Areas of use:

• in the production of ultra-pure materials, such as cathode copper;
• geological exploration laboratories for express analysis of rock samples;
• mining industry for elemental analysis of ore;
• ferrous, non-ferrous, powder metallurgy for input control of raw materials and output control of products;
• research institutes, etc.

As a source of spectrum excitation, the SPAS-01 atomic emission spectrometer has an arc discharge in air. Power consumption during plasma combustion is not more than 2000 W, without plasma is not more than 500 W. The recording elements are linear CCD detectors. The detection limits of elemental spectral analysis of solids on the SPAS-01 spectrometer according to the “3σ” criterion for most elements lie in the range of 10-5 - 10-4%.

Dimensions of the spectrometer SPAS-01 (L x W x H): 1480mm x 1470mm x 1200mm.

– a laser-spark emission spectrometer is a unique device for analyzing a wide range of analytical samples: metals, alloys, wire, rocks, soils, ceramics, glass, etc.

A feature of the device is the use of a combined source of excitation of the spectra. The combined laser-spark emission spectrometer (LIES) combines the advantages of laser, spark, and arc spectrometers and does not carry their disadvantages. From the spark spectrometer LIES took the accuracy and reproducibility of the analysis from measurement to measurement. From the arc spectrometer - the versatility of the tasks performed, and from the laser - simple sample preparation and the ability to analyze miniature and inhomogeneous samples.

Inerta 50– autonomous installation for purification (post-purification) of argon or other inert gas (helium, neon, xenon or krypton). Removed impurities: oxygen, hydrogen, nitrogen, hydrocarbons, carbon monoxide and carbon dioxide, moisture.

Applications:

• argon purification for spark and arc emission spectrometers;
• purification of argon or helium for chromatographic analysis;
• wherever a high degree of purification of inert gases is required.

The residual level of contamination of the inert gas at the outlet is less than 1 ppm, the argon at the outlet is 99.9999% pure.

The power of a portable ECO analyzer, the ease of use of a handheld instrument. The Spectro SPECTROPORT is designed for metal fabricators, fabricators, machine builders, service organizations and many other companies that need to control the quality of their parts.

SPECTROPORT The power of a portable ECO analyzer, the ease of use of a handheld instrument

Many companies need to check the chemical composition of metals. This quality control is important for metal manufacturers, processing and engineering companies, service organizations and many others. An accurate analysis of metal alloys, their identification and confirmation of compliance on the basis of the determined elemental composition is required.

Mistakes can play a big role. Mixing alloys during shipping or at the factory leads to additional financial costs, a lot of extra work, or even the loss of important contracts.

Many companies use X-ray fluorescence analyzers (XRF) to solve such problems. However, there are a number of problems with this. For example, a hand-held XRF analyzer cannot determine the exact carbon content, which is the only indicator that can distinguish low alloy steels. Also, with hand-held XRF analyzers, difficulties arise in determining the critical contents of sulfur and phosphorus.

SPECTROPORT - Portable arc/spark optical emission spectrometer (OES) for metal analysis

When a handheld analyzer isn't enough, the amazing new SPECTROPORT brings advanced ECO technology to the table with the ease of use of handheld analyzers. The SPECTROPORT combines in a revolutionary way the benefits of the flagship of the SPECTRO line, the SPECTROTEST analyzer, with a more compact and lighter body. It is as fast as a handheld XRF analyzer, allowing analysis to be completed in seconds. But unlike a hand-held XRF analyzer, it makes it possible to accurately determine the content of carbon, sulfur, phosphorus, boron, lithium, beryllium, calcium, silicon, magnesium and aluminum at low and critical concentration levels. To simplify the actions and decision-making of operators, the principle of point-and-analyze (point-and-shoot) is implemented.

Economy and reliability Despite its power and superiority, SPECTROPORT is incredibly affordable - its cost is comparable to some handheld XRF analyzers. In addition, it has a low cost of ownership. You can be sure that no errors will be made during the analysis of the metal. SPECTROPORT has the proven reliability of SPECTRO, the undisputed leader in metal analyzers with over 40,000 spectrometers in service worldwide.

Excellent ease of use A number of arc/spark spectrometers are difficult for operators. But not SPECTROPORT. It is as easy to use as handheld analyzers and has the same analytical performance as the well-known SPECTRO OES spectrometers. You get fast analysis and results, portability, intuitive ease of use, and minimal standardization effort.

Maximum mobility SPECTROPORT has a variety of options for maximum mobility, including a large or small transport trolley and batteries. For analysis in hard-to-reach places - on small or fixed parts, wire, hidden welds, infrastructure - you can use the SPECTROPORT in a wireless configuration with a rechargeable battery.

Advanced software: simplicity comes first

With our Spark Analyzer Pro software, users can quickly and easily select the required usage modes, sample identification fields, and more. Also, newly installed plugins will help to do some of the work - and eliminate most of the errors. For example: the connected automatic program search (APP) will automatically select the appropriate program with calibration for the corresponding group of alloys. SPECTROPORT is extremely easy to use. A simplified view of the information display eliminates the possibility of erroneous selection of commands. The user receives clear selection options (suitable / not suitable) in the mode of sorting and identifying brands, sets commands using the buttons on the toolbar.

iCAL 2.0: Standardization ready at any time

Pre-installed calibration modules and an updated unique SPECTRO development - the iCAL 2.0 intelligent calibration logic system eliminates re-calibrations and delays in work. At the beginning of the working day, standardization is carried out on one sample (less than 5 minutes), after which the device is fully configured.
iCAL diagnostics allows you to be sure of stable operation during a normal working day. And now iCAL 2.0 helps maintain standardization settings regardless of most temperature shifts!

Two test guns: defining a wide range of elements The standard test gun is light and thin, allowing you to quickly switch from arc to spark mode (argon atmosphere is used for spark mode). The other, slightly larger, test gun has built-in ultraviolet (UV) optics that can detect carbon in steels, sulfur, phosphorus, boron, or tin; it also allows you to analyze samples in spark and arc mode.	Difference from XRF: carbon in steels In addition to using the spark mode in an argon atmosphere to determine the carbon content in the SPECTROPORT, a patented technology (US7227636 patent) for determining the carbon content in the air atmosphere (in the arc mode) is unique for this class of devices. Thus, unlike XRF analyzers, SPECTROPORT allows you to quickly (on average 3 seconds) identify low-alloy steels by the carbon content measured in the arc mode in air.	Leading line of metal analyzers The SPECTROPORT is a great addition to SPECTRO's range of mobile metal analyzers. Our range of mobile instruments also includes our flagship SPECTROTEST ECO analyzer. And the line of stationary metal analyzers consists of OES analyzers: SPECTROLAB - our flagship; powerful SPECTROMAXx; and an affordable entry-level SPECTROCHECK analyzer.
Innovative optics: resistance to temperature changes The new SPECTROPORT optical system covers a wide wavelength range, providing superior accuracy, stability and reliability without additional heat. This is a significant achievement: in combination with iCAL 2.0, the self-adjusting system requires minimal operator intervention and provides high resistance to external temperature changes.	Results Management With SPECTROPORT you get the flexibility and control you need over your metal data. The system provides advanced tools for accurate and unambiguous analysis, logging and everything you need to document the results for each incoming analysis object.	Get results anywhere Get all the information you need, wherever you need it. With applications and PC connections via WLAN/LAN, USB, SPECTROPORT has ample opportunity to access and work with data throughout the enterprise.

Service and Support

Input / output control depends on the ability to analyze the metal. To ensure that SPECTROPORT delivers alloy identification, SPECTRO offers the industry's best support program, AMECARE Performance Services.
More than 200 specialists in more than 50 countries provide uninterrupted worldwide support throughout the life of the instrument. The user can receive maintenance and upgrades to restore and improve performance, calibration packages, consultations, targeted training and ongoing support, including the new AMECARE M2M remote diagnostic system, which allows you to directly contact a SPECTRO service specialist. On the territory of Russia, methodological and service support is provided by SPECTRO TS.

Have questions about a product?

Hello! My name is Igor Lyubich. I am the head of the Non-Destructive Testing Equipment Department.

Ready to answer all your questions about the product "Spectro SPECTROPORT Spectrometer". Write or call me if you need advice or want to place an order.

Reviews for Spectro SPECTROPORT Spectrometer

Rules for publishing reviews

Buyer rating

0 reviews

There are no reviews yet.

https://www..htm?get_opinions=1

PERGAM Certified Service Center celebrated its 20th anniversary in 2016. During this time, we have accumulated solid practical experience in the maintenance, repair, calibration, integration and verification of equipment. Having made a purchase of equipment in our online store, you will acquire a reliable partner in the person of PERGAM, always ready to provide qualified support.

The service center has official licenses for the installation, configuration, maintenance and repair of all supplied equipment. The first authorized service center of FLIR Systems in Russia and the CIS.

• The engineering and technical staff of the service center regularly improves their skills and undergoes re-certification with the receipt of official certificates and certificates in the training centers of manufacturing companies;
• At the request of the customer, we carry out calibration, technical verification, hardware and software upgrades of equipment and instruments for their use in special conditions;
• We carry out a full cycle of hardware and software maintenance of the supplied equipment: diagnostics, prevention, modernization, restoration or repair;
• Warranty maintenance of equipment and devices can be carried out both in our service center and on the territory of the client;
• For a certain group of our products, we provide extended periods of free service.

More than 30 models of non-destructive testing instruments have been produced under the PERGAM brand, some of which are unique and have no analogues in Russia. The software for the diagnostic equipment of our production is written by the company's programmers in partnership with a research institute.

Production

Modern production facilities and a solid scientific potential have allowed PERGAM to organize the production of its own technical safety and control systems, measuring instruments and equipment, stationary and mobile laboratories.

• PERGAM Research Laboratory conducts a full cycle of development and creation of innovative software and hardware products;
• The company has formed an effective scientific and engineering core capable of creating systems with specific characteristics adapted to harsh operating conditions;
• PERGAM is an official resident of the Skolkovo Innovation Center, working on complex technical projects;
• The company has created its own systems that can compete on equal terms with modern foreign developments:
• Mobile (including aviation) and stationary complexes designed for remote control of gas pipelines, monitoring and measuring gas concentrations (DLS-PERGAM, DLS-PEGAZ);
• Non-contact medical thermodiagnostics system PERGAMED, which detects diseases at early stages of development;
• Thermographic systems for covert surveillance and technical security TITAN, PERGAM MC-460C.
• The developments are adapted to work in harsh climatic conditions with high levels of temperature and humidity differences.

We will teach you how to use the functionality and capabilities of the purchased equipment at 100%. The PERGAM company trains specialists in its own training center, on the territory of the customer and in foreign training centers of manufacturing companies (in Sweden, USA, Ireland, Great Britain, Germany, Italy, France, Austria, Switzerland and Israel).

Education

The training center conducts theoretical and practical training, retraining, advanced training and certification of specialists in the operation and maintenance of thermal imaging control devices, equipment for searching and diagnosing underground utilities. Full-time training, training period 2 days with the issuance of a certificate.

• An own methodology for training, retraining and certification of specialists in the field of infrared testing and non-destructive diagnostics was developed with the presentation of certificates to graduates;
• Training of specialists in the field of thermography is carried out at the central office of PERGAM (Moscow) and training centers of partner companies. We will organize training for you on the territory of manufacturing plants in the USA, Sweden, Germany, Great Britain, Ireland. If necessary, instructors and consultants train specialists at the training areas of customers;
• The customer himself chooses the training time that is convenient for him, since PERGAM trains specialists in the field of thermodiagnostics all year round.

PERGAM is a permanent participant of major international exhibitions and conferences. In 2007, we were recognized as the industry's most attractive employer. In 2013, they received an honorary title - a Skolkovo resident company.

Awards

The successful activity of the PERGAM company in the Russian and CIS markets has been marked by awards and diplomas.

• We regularly take part in international industry exhibitions, scientific and practical conferences, seminars, forums and presentations, presenting technical innovations at them;
• The developments of PERGAM are positively assessed by specialized specialists, as evidenced by the awards and diplomas received by the company;
• PERGAM is a member of the Russian, Austrian, German, Italian and Swiss societies for non-destructive testing, as well as the international helicopter association HAI (Helicopter Association International).

The industrial equipment supplied by us has international certificates of conformity. in Russia we carry out certification according to ROSTEST. For certificates and certificates of approval of measuring instruments, see the relevant section and product cards.

Certificates and licenses

In its business activities, PERGAM is guided by the necessary set of state permits and supporting documents.

• The company provides services, the quality and level of which comply with Russian legislation, international rules and regulations. This is confirmed by relevant documents: licenses, licenses and certificates;
• The quality and safety of PERGAM products are certified by official certificates of manufacturing companies;
• We are the only company in Russia that has a corporate certificate for the maintenance and repair of FLIR Systems measuring thermal imagers;
• In 2008, the company received the international certificate ISO 9001-2001, which confirms its reliability and compliance with international standards of economic activity.

Pergamon employs 137 people in 13 branches around the world. The unique equipment and developments of the company are implemented and successfully operate all over the globe. The central European office is located in Zurich, which is the focal point for offices in Italy and the USA.

Branches

For 20 years, PERGAM has expanded its network of representative offices in near and far regions. Today, in addition to the central Moscow office, there are 13 branches of the company in Russia, CIS countries and far abroad.

• The presence of branches and representative offices of the company in other cities and countries allows us to establish close contacts with partners, realistically assess the preferences of regional customers, organize a convenient system for training specialists, reduce transportation costs and product costs;
• Today, PERGAM branches operate in the USA (Seattle), Switzerland (Zurich), Italy (Brescia), Ukraine (Kyiv), Belarus (Minsk) and Kazakhstan (Astana);
• On the territory of the Russian Federation, Pergamum divisions are located in St. Petersburg, Nizhny Novgorod, Samara, Lipetsk, Yekaterinburg and Khabarovsk.

Mass spectrometric control is an integral part of the technology of nuclear fuel production at all its stages, starting with the production of UF 6 in sublimation production and control of the enrichment process in separation production and ending with the production of fuel elements and their processing. In addition, this method is the only analytical method for the control and certification of finished products.

Our company, together with OAO UEIP, FSUE EZAN and OOO Uralpribor, manufactures and supplies to the market specialized mass spectrometers of the MTI-350 series (-350G, -350T, -350GS and -350GM), designed to re-equip enterprises of the nuclear industry with modern means for carrying out precision measurements of isotopic, elemental and chemical composition. Mass spectrometers of the MTI-350 series are distinguished by their unique analytical characteristics, high reliability and extended service life in industrial conditions.

Features of mass spectrometers of the MTI-350 series:

• ion-optical system with high dispersion;
• an ion source with a molecular regime of sample leakage into the ionization chamber;
• multicollector ion receiver with adjustable position of collectors;
• venting system with reduced consumption of sample substance;
• electronic part, made using modern element base;
• control system based on an industrial computer of high reliability;
• specialized software for automatic determination of elemental and isotopic composition

Mass spectrometric complex MTI-350G

The spectrometer is designed for on-line analysis of the isotopic composition of uranium in the gas phase (in uranium hexafluoride). Specialized software included in the device allows you to control the operating modes of the mass spectrometer and its individual systems, configure and align the device, and perform analysis in automatic mode.

Main characteristics:

• the upper value of the range of mass numbers at an accelerating voltage of 8 kV is not less than 360;
• resolution - not less than 1000;
• sensitivity threshold for uranium - no more than 10 ppm;
• sample consumption - no more than 1 mg/h;
• isotopic threshold of sensitivity - no more than 10 ppm;
• memory factor - no more than 1.004;
• relative standard deviation of a single measurement of the isotopic composition of uranium hexafluoride is not more than 0.02% for the content of uranium-235 in the range of 1 - 5%;

The MTI-350G mass spectrometer is registered in the State Register of Measuring Instruments under No. 23457-02 and has certificate RU.C.31.005.A No. 13014.

Mass spectrometric complex MTI-350T

The spectrometer is designed to analyze the isotopic composition of uranium, plutonium and mixed fuel
(MOX-fuel) in the solid phase.

Main characteristics:

• the value of the accelerating voltage is 8 kV;
• the upper value of the range of mass numbers at an accelerating voltage of 8 kV is not less than 300;
• resolution - not less than 800;
• threshold of isotopic sensitivity at a shift of 1 a.m.u. from peak 238 U - no more than 10 ppm;
• the limit of the permissible standard deviation of the random component of the relative error when measuring the atomic fraction of the uranium-235 isotope with a content of 1.0% is not more than 0.04%;
• operating mode - continuous, round the clock;
• service life - at least 10 years.

Mass spectrometric complex MTI-350GS

The spectrometer is designed for operational control of the technological process of sublimation production of uranium hexafluoride.

The spectrometer allows simultaneous analysis of the content of the following substances: hydrogen fluoride (HF), nitrogen (N 2), oxygen (O 2), fluorine (F 2), argon (Ar) and uranium hexafluoride (UF 6).

Mass spectrometric complex MTI-350GM

In 2014, work was completed on testing an upgraded version of the MTI-350G mass spectrometer with improved technical and analytical performance.

The main advantage of the new MTI-350GM mass spectrometer is the complete automation of the device hardware, which ensures the execution of all necessary adjustment and adjustment procedures in automatic mode or using remote access via LAN. The hardware-software complex of the MTI-350GM mass spectrometer allows continuous round-the-clock measurements of the isotopic composition of uranium hexafluoride in a fully automatic mode without human intervention. Thus, the MTI-350GM can be operated as part of an unmanned production system that does not require the presence of an operator.

American instrument-making company, specializing in analytical instrumentation, instruments for optical methods of chemical analysis, continuous analytical control of the technological process (laboratory, portable, industrial analytical equipment for the chemical, petrochemical, food, pharmaceutical industries). Manufacturer of laboratory, portable and industrial NIR spectrometers (laboratory, portable and in-line industrial analyzers operating in the near infrared region). Manufacturer of optical components for analytical and scientific instruments, medical and technological equipment (solid-state lasers, LED laser modules). Brimrose Corporation manufactures laboratory, portable and industrial optical spectrometers for the near and mid-infrared spectral range (optical spectrometers for the near and mid-IR range, NIR spectrometers) designed to solve applied analytical problems - identification of chemical compounds in the field, storage and unloading, analysis component composition and moisture measurement of feedstock, analytical control of technological parameters in production, quality control of finished products of the chemical, petrochemical, food, pharmaceutical industries. Brimrose Corporation's Acoustic Optic Tunable Filter Near Infrared spectrometers or AOTF-NIR spectrometers for the near and mid-IR range feature a compact, rugged design (portable and industrial versions), no moving parts, and fast spectrum scanning (process monitoring, chemical reactions). in real time). The company also manufactures a 16-channel optical multiplexer as an economical solution for the parallel control of several technological processes. Brimrose Corporation produces a whole family of spectrometers for the near and mid-infrared range (AOTF-NIR spectrometers) and analytical systems based on them (NIR spectrometers - analyzers, AOTF-NIR analysers): portable portable NIR spectrometer - analyzer ("Hand-held" AOTF -NIR analyzer), compact and mobile laboratory NIR spectrometer - analyzer (miniature laboratory NIR analyzer), desktop laboratory NIR spectrometer - analyzer, industrial flow NIR spectrometer - analyzer, multichannel industrial flow NIR spectrometer - analyzer (the analytical system includes a NIR spectrometer and 16 channel optical multiplexer), compact industrial NIR spectrometer - analyzer (Free Space AOTF NIR analyzer), multi-purpose industrial NIR spectrometer - analyzer for monitoring the chemical composition and thickness of protective coatings on the surface of materials, the thickness of the lubricant layer on the surface of parts and products (ThinFilm NIR analyzer), in-line NIR spectrometer - analyzer of the composition of petroleum products for measuring the characteristics of motor fuel, the octane number of gasoline, in-line NIR spectrometer - analyzer of the chemical composition and moisture content of seeds, fruits, food products ("Seed Meister" NIR analyzer), in-line NIR spectrometer - analyzer of pharmaceutical products for continuous quality control tablets (Tablet NIR Analyzer).
The analytical system "Seed Meister" AOTF NIR analyzer is designed for high-speed sorting of hybrid seeds (seeds of corn, soybeans, coffee, watermelon, peanuts), sorts up to 60 seeds per minute according to such criteria as the content of oil, protein, starch, moisture, sugar in the seeds , unsaturated organic acids, and the measurement is carried out in parallel for all parameters. The NIR seed analyzer makes it possible in some cases to predict the germination of seeds of agricultural crops. The automated NIR analyzer "Seed Meister" can be used in the food industry for in-line sorting of fruits and vegetables (apples, pears), determining the sugar content of fruits. Automated NIR analyzer can be used in the food and fish industry for product quality control, continuous determination of protein, oil, water content in the product (continuous measurement of moisture and chemical composition).
Automated analytical system for the pharmaceutical industry Tablet NIR Analyzer provides continuous, non-contact, non-destructive quality control of finished dosage forms (tablets, capsules) in the pharmaceutical industry. The automated NIR analyzer Tablet NIR Analyzer operates in parallel in transmission and reflection modes (both measurement modes can be used simultaneously), directly on the conveyor belt, it controls the chemical composition of tablets, determines the chemical composition and measures the thickness of the tablet coating. The Tablet NIR Analyzer Automated Analytical System features an industrial stainless steel (NEMA 4X) design, an optical system for parallel spectral analysis of tablets on a conveyor belt in reflection and transillumination mode, an embedded industrial computer, and software for continuous analysis and quality control of pharmaceutical products.