In fact, such an important PC accessory as a mouse has a lot of settings. Starting with visual
and ending with point options that will make the work more enjoyable and easier. And in
Today I will tell you how easy it is to do it yourself.
In order to enter the mouse control console, you need to open the Control Panel through the "Start" and
select the "Mouse" option.
Button assignment
In the window that opens, select the "Mouse buttons" tab.
Button Configuration
Here you can set up variations with a change of destination
left and right mouse buttons (so-called left-handed-right-handed mode).
Double click execution speed
A little lower in the window is a scroller, by moving it left and right, you can adjust how much
the fastest response is after double-clicking the left mouse button.
Sticky mouse button
Quite a useful function, although it has a purely domestic aspect. If sticking is active, then now
there will be no need to hold down the mouse buttons when dragging folders and files. Enough for a few
seconds, hold down the button and the selected file (folder) itself will “stick” to the cursor. Well, to complete
the procedure for dragging an object, it is enough just to make one click with the mouse in the place where the file
inserted.
The "Pointer Options" tab is responsible for several important options that will simplify not only
work on a PC, but also improve the gameplay in various computer games.
moving
We see a slider whose movement controls the speed at which the mouse pointer moves across the screen.
Moving it to the left reduces the speed, and to the right, respectively, increases it. By the way, the more
the screen resolution is used on a PC or laptop, the smoother and slower movements appear
cursor. It's a little annoying and puts pressure on the eyes.
For the fastest possible cursor movement, you can uncheck the option "Enable high
cursor precision. Perhaps this is the most cost-effective solution for large monitors. But, in your own way
I’ll tell you from experience that almost no one bothers with setting this parameter, being content with the basic
settings.
The initial position of the cursor in the window
Not a critical feature, but still useful for saving time. When activated like this
called "default button", when we open a dialog box, the mouse cursor will always be
be on it.
Cursor Visibility
A purely visual function that adjusts the following cursor options:
Pointer trail. When moving the cursor, it is multiplied into several copies.
Hiding the pointer. When typing on the keyboard, the cursor disappears so as not to distract your eyes
from work.
Cursor search. If suddenly the mouse cursor is not visible on the screen (especially true on white
background), just click Ctrl, and immediately a circle will be indicated, indicating exactly where the
pointer.
This tab controls the visual parameters of the pointer.
Scheme
Simply select a scheme from the dropdown list and enjoy various visual and animation
cursor effects.
In addition, each effect can be adjusted individually. Though uninformed
it is better for users not to get into fine settings, because then it will be difficult to restore
standard options.
Wheel
You can also customize the mouse wheel. To do this, go to the Wheel tab, there are not as many settings as in the previous ones, but still.
Vertical scroll
Everything is very simple here, you can adjust the scrolling speed.
Horizontal scroll
In horizontal scrolling, everything is the same.
In conclusion, I can say that only a few mouse settings are useful for ordinary people, and all
the rest are sharpened for a specific activity on a PC. However, knowledge is not redundant.
never, and I hope my information was at least a little useful for you.
Often, after buying a new manipulator, the question arises of how to connect a wireless mouse to a laptop without problems for a novice user. As practice shows, there is nothing complicated about this, everyone can handle it. This article will provide a step-by-step guide that will allow you to solve this problem without any problems.
Advantages and disadvantages
Wireless manipulators have a number of advantages: they are easy to use (no need to pull the wires and worry about the fact that they are not long enough), work on almost any surface (the exception is glass, on which the optical sensor does not function), simple and easy to set up and operation (most often, the operating system itself finds the drivers and installs them, the user does not take any part in this). Therefore, when buying a new mouse, more and more users are turning their attention to such devices. They have one minus - the batteries are periodically discharged, they need to be changed for new ones. This is the most common reason why a laptop does not see a wireless mouse.
How to choose?
Before buying a laptop, you need to choose and buy it correctly. Before going to the store, you need to decide on a list of potential tasks. If you plan to watch movies, listen to music or visit websites, then a regular 3-button mouse with one scroll wheel will suffice. But gamers should turn their attention to more expensive devices that have more buttons and 2 scroll wheels.
In the process of choosing in the store, we evaluate ergonomics. The manipulator should fit comfortably in the hand. Next, we turn our attention to the manufacturer. The best in terms of "price-quality" are devices of the brands "A4Tech", "Sven", "Genius" and "Logitech". It is on them that it is recommended to pay attention. But if the budget is not limited, then you can choose Mad Catz. Mice of this brand cost about 160 USD, but at the same time they are distinguished by an exclusive design and maximum user friendliness in gaming applications.
Batteries
Connecting a wireless mouse to a laptop, we start by installing the batteries. Any manipulator of this class is powered by two standard finger batteries. Usually they are included, but there are exceptions. In this case, you need to check with the seller at the stage of purchase. If they are not, then you need to additionally purchase two such batteries. Then we find on the mouse the cover from the battery compartment and open it. The battery polarity is marked on the bottom. Fulfilling this condition, install them, and then close this compartment.
Installing the receiver
The second step in answering the question of how to connect a wireless mouse to a laptop is to install the transmitter. It is equipped with a rectangular USB connector, with its help information is transferred from the manipulator to the computer. After opening the package, we find it. In some mice, it can be hidden in the battery compartment (it's a miniature device that can easily fit there). Next, find any rectangular USB socket on the laptop and install it.
Drivers
After installing the receiver, the installation of the necessary software in most cases occurs automatically. At the same time, a message appears in the lower right corner of the screen stating that a new device has been found, it is being configured. Next, you will see a notification: "The new device is installed and ready to go." This indicates that the software debugging has been completed. Now the manipulator should work. That is, when it moves along the surface, the pointer on the screen will have to move. If this does not happen and the laptop does not see the wireless mouse, you need to check the batteries.
In some cases, to activate the manipulator, you must press the button labeled "On / Off". In this case, the optical sensor must necessarily light up. If the mouse is non-standard (for example, gaming), then install additional drivers. They can be taken either on the CD that comes with the manipulator, or downloaded from the official website of the manufacturer. In the first case, we use the drive. In the second, you need an Internet connection, where, using search engines, we find the necessary information and download it. Then you need to install the drivers by following the instructions of the installation wizard. Finally, be sure to restart your computer.
Results
As part of this article, it was described step by step how to connect a wireless mouse to a laptop. The first step is to install the batteries. Next, connect the transmitter. If necessary, install additional drivers. In the end, it is recommended to reboot everything. As you can see, there is nothing complicated. So let's go and do it. Good luck!
keyboards and mice
to a desktop computer
Keyboards and mice, like everything else
for a desktop computer - also different.
Modern keyboards and mice, for the most part,
have a USB connection.
In addition to being widespread, the advantage
USB interface is connectable
to a running computer.
But in the description, I will tell a little
and other connections.
Connecting a keyboard with a USB connection to the system unit
Keyboard connection,
with USB connection,
to the system unit
Below is the connection diagram of the main units,
to the system unit of a desktop computer.
As you can see in the diagram, there are two options.
keyboard and mouse connections.
Interfaces for USB connection.
Interfaces for connecting PS/2.
In this section, we will look at
keyboards with USB connection.
On a desktop computer, the USB connectors may be
both on the front panel of the system unit and on the back. borrow
both horizontal and vertical position.
There is no need to show all existing keyboard options.
I will present to you only two of them.
On the left is a keyboard with a detachable cable. Before connecting
it to the system unit - you need to connect the cable to the keyboard itself.
And then connect to on the back of the system unit.
On the right is a keyboard with a built-in cable. It can be immediately
connect to the USB port on the back of the system unit.
And that's all ... After turning on the computer and installing the Operating
Windows system special drivers - you can work with the keyboard.
Connecting a mouse with a USB connection to the system unit
Mouse connection,
with USB connection,
to the system unit
Mice with USB connection.
Wired and wireless.
Connecting a mouse to the system unit is very simple.
Insert the USB connector of the mouse into the USB port of the system unit.
And, the first time you connect, wait until Windows
connect the mouse and report its readiness for operation.
PS/2, Bluetooth and other connections for keyboard and mouse
PS/2 connections, Bluetooth
and others, for keyboard and mouse
If your keyboard has a PS/2 interface,
then you connect the keyboard to the PS/2 port.
The PS/2 interface is used on ATX-powered motherboards.
It is a thin round connector - 6-pin miniDIN.
After connecting new equipment to the PS/2 port, you need to
On the diagram of the rear panel of the system unit,
for keyboard and mouse, painted.
PS / 2-port for the keyboard is painted in lilac.
And for the mouse - in green.
It is possible to adapt the PS / 2 interface of the keyboard and mouse,
to connect to a USB port. Adapters are used for this purpose.
The mouse is the main assistant to the PC user. Previously, we dealt with only one type of mouse that connected to a computer using a special connector, but now there are mice with a USB cable and even wireless ones. In this article, we will analyze how to connect a mouse of any type to a computer.
Classics of the genre
If you have a good old mouse with a PS / 2 connector, then the whole connection comes down to a very easy task - just plug the mouse into the appropriate PS / 2 port on the computer, usually located on the back of the system unit. After a few seconds, the mouse will be detected and ready to go.
USB connector
Connecting a mouse with a USB connector is also very simple, plug the USB connector of the mouse cable into one of the USB ports on your computer, wait a few seconds and start using the mouse. No software installation is required.
Wireless mouse with receiver
If the mouse is wireless, then it comes with a special receiver with a USB connector, which must be inserted into any USB port on the PC. Turn on the mouse using a special button / lever on it, wait until the receiver and the mouse "make friends", and you can start working.
Wireless mouse with Bluetooth
A wireless mouse is very convenient, but if you get a model with a receiver, there is a problem - it is very easy to lose it, and therefore, a Bluetooth wireless mouse is probably a more convenient option. However, keep in mind that such a mouse will only work if your PC has a Bluetooth module.
To connect a wireless mouse to a computer:
- turn on Bluetooth on the PC and turn on the mouse itself;
- in the Bluetooth menu on the computer, start discovering a new network (the name of the mouse network can be found in the device documentation);
- once the desired network is found, select it and click the "Connect" button.
All! After a few seconds, the mouse can be used.
Important point! The wireless mouse is powered by batteries, so be sure to turn off the mouse after use. In addition, remember to replace the batteries in a timely manner - most problems in the operation of wireless mice are related to the discharge of batteries.
What is more convenient?
At first glance, of course, the answer is obvious - a wireless mouse is more convenient than a wired one, but if you consider that, firstly, a wireless mouse needs regular battery replacement, and the maximum range at which it can interact with a PC does not, as a rule, exceed 3 meters, the answer is not so obvious. Of course, it is much more economical to buy a wired mouse - it is cheaper by itself and does not require batteries, but for those who are tired of wires, it is still better to deal with a wireless one.
A wireless mouse gives you more mobility and more free space on your desk. Fortunately, the hated wires are gradually leaving our homes and offices. Using such a device is very convenient, and the connection does not take much time and effort.
How to connect a wireless mouse correctly?
There are two main methods. The first is to connect the receiver, for which you must first insert batteries into the mouse. The receiver does not require batteries as it is powered by the computer via the USB connector. If your system uses a mouse port, you will need an adapter.
The mouse receiver has a USB plug, but with an adapter it can be plugged into the mouse port.
The next step is to connect the mouse to the receiver. To do this, place them side by side, pay attention to the button on the receiver - press it. Then find the tiny button on the bottom of the mouse, which is usually pressed with the tip of a pencil or paperclip. Simultaneously press 2 buttons and hold for 5 seconds at the shortest distance between the mouse and the receiver.
It should be said that on the latest models of mice, this procedure will not have to be done - they are ready for use immediately after unpacking.
After connecting a wireless mouse to or a PC, you need to find a permanent place for the receiver - it should be no further than 2.7 meters from the mouse. For example, you can install it on a monitor, the back of a laptop screen, on a system unit, or simply on a table.
Be sure to restart your computer if you connected through the mouse port. If the connection was made directly via USB, you can immediately start using the mouse. And to customize the mouse for yourself, use the software disc that comes with the mouse or download the software from the manufacturer's website.
If you don't know how to connect an optical wireless mouse to your tablet, use the second method. Start again with the batteries, then turn on the bluetooth and make sure your device is detected (the LED on the mouse starts flashing). Follow the instructions on the screen. Customize the mouse settings for yourself and you can safely start using it.
For more convenience, consider purchasing a wireless mouse and keyboard at the same time. In this case, you can pick them up in the same design. Connecting the keyboard is similar to connecting a mouse - the process is quite simple.
