How to wear sneakers without tying your laces. Original ways of lacing shoes.

Shoes are an important part of every person's wardrobe. And so that it looks colorful and harmonious, we will consider various ways of lacing so that they last as long as possible and do not cause inconvenience.

How to tie shoelaces so they never come undone?

A whole culture was made from a similar piece of clothing, this led to the fact that there are many knots for every taste:

  1. "Ian" node. Make a loop with all the ends, passing them one through the other at the same time.
  2. Safe. Create a couple of loops, push them through the hole in the middle.
  3. Standard. The way parents teach their children since ancient times.
  4. Surgical. At the beginning, everything is done in the standard way, but the other end wraps around the knot additionally.

Simple ways will always help to bring the appearance of shoes in order.

"Knotted Lacing"

It is the most popular among all generations. To do this, follow these steps in sequence:

1. The lace should go through the bottom holes, and out through them.

2. Cross the ends, then pass from the inside to the outside in the upper holes.

3. Repeat these steps until the end.

This variation is quite light and saves you from chafing.

"Straight European-style lacing" or "Ladder lacing"

As the name suggests, the method is quite popular in European countries.

In order to make it you need:

  1. Pass the string through the bottom holes and pull it out from all sides.
  2. The first end should come out crosswise through the last hole.
  3. The other comes out through one lacing hole.
  4. Lace up with one or the other alternately until the holes run out.

The zigzag method gives strength and durability to knots and fabrics in addition to a neat appearance.

"Direct (fashionable) lacing"

In the people, this option is known as "rectangular lacing".

The tying technique is as follows:

  1. The lace goes through the bottom holes and winds into the middle of the shoe from all ends.
  2. The first end is lifted up from the right, exposed from the upper hole and pushed into the left.
  3. Lift both ends up and out (skip one hole).
  4. Stretch to the opposite side and pull even higher.
  5. The right lace goes through the last hole at the top.

Remember, you need an even number of holes here.


In the first paragraphs of the article, several options for creating nodes were indicated. In this section, we will dwell on this aspect in more detail.

There are several known nodes:

  • double knot;
  • Crossed;
  • reef.

All of them have a fairly original character and are unusual for most people.

The first option goes like this:

  • Tie any knot on the shoe.
  • Leave long loops.
  • Tie them together.

Strong and reliable lacing at your service.

Follow these steps for the second method:

  1. Pass the loops through one another.
  2. Bring them out through both sides.

simple and fast way put yourself in order.

The reef knot is suitable for very short laces and is very easy to untie from any position.

How to tie shoelaces without a bow?


In order to get rid of the bows, use a surgical knot. It is an improved version of the direct node. Designed for high loads, does not untie itself. Good for long walks in nature.

It is done like this:

  1. Create a loop from the end of the right lace (pass the working end from top to bottom). He should look to the left.
  2. A hole appeared between the loop and the working end. Pass the left lacing into it, its ending looks to the left.
  3. As a result, two identical loops appear.
  4. Tie both ends into a strong and durable knot.

This way you save a lot of time and don't stop when you need it the least.

5 coolest ways to lace up your shoes

Wednesday, June 07, 2017 13:00 + to quote pad

Currently, there are many ways to lace up sneakers or sneakers.

Modern lacing is not just a way to keep shoes on the foot, but a way to express yourself or attract attention.

It is acceptable for many subcultures to wear brightly colored shoelaces and tie them in a completely non-standard way.

If you study the lacing in detail, you can be very surprised how original the types of tying bows, threading through holes, twisting among themselves.

For example, the video shows 5 of the coolest ways to tie shoelaces on sneakers.

And below are some tips on how to lace up your shoes beautifully and correctly.


Types of lacing sneakers

The original lacing will become a real decoration for your shoes, it will attract the attention of others. Sometimes unusual way tying shoelaces can enhance the beauty of your sneakers or sneakers.

Lacing "Zigzag"

The most popular tying method is the Zigzag. This is a common way to tie shoelaces on any shoe. It is a crossing of the rope along its entire length. Such lacing does not attract attention and is absolutely standard.


Everyone can lace up the Zigzag, even a child. For this you need:

  1. Find the lowest rings of holes and thread the string through them so that the two ends come out from the inside out.
  2. To the next holes, you need to cross the ends of the lace and also thread them from the inside out, you need to do this movement for each pair of holes
  3. At the end of the holes, the two ends of the lace are tied into the simplest bow of two loops.

This traditional lacing is good because it is located on the outside of the shoe and thus does not rub the foot. However, it has a drawback - too tight knitting crushes the boot.


European lacing

Another, no less popular, lacing - "European". It looks good, the main thing is that it is original and not boring, and yet it does not cause any negative emotions.
As the name implies, this method of tying shoelaces originated in Europe and is still very popular in it.

The tying method adds originality to the laces: one lace must pass through both holes at the same level


Making European lacing is not at all difficult:

  1. The lace must be threaded from the outside inward into the lower annular holes
  2. One side of the lace (marked yellow in the picture) must come out through the upper holes of the lacing
  3. The other side (marked in blue in the picture) should go one hole higher
  4. Alternate lacing continues until the end of the holes.

This type of lacing is quite fast and the laces tied “in a European way” look neat and stylish. And this despite the fact that at the beginning the lacing looks a little confusing.

Straight lacing

If you really want to draw the attention of others to your shoes, you need to try straight lacing. It's absolutely flat parallel arrangement laces in the holes. There is no diagonal lacing and therefore the shoes look neat.

Be careful, such lacing should be on shoes that have an even number of holes. If you have an odd number, leave the top holes without a lace, as is done in the picture.


Try straight lacing on your shoes:

  1. One end of the lace (indicated in blue) should be slightly shorter than the other end
  2. One of the ends remains unlaced, and the second reaches the very top
  3. The lace in this knitting must necessarily go into the holes from the outside to the inside.
  4. It is not customary to tie bows in such lacing, hide the laces inside

Sometimes it is difficult to tie neatly "straight" lacing the first time, but with a few practice and you can achieve a beautiful result.
The advantage of this lacing is that it can always be loosened for free wear.


sawtooth lacing

If you have never tried anything more original than "Zigzag" or "Straight Lacing", you can start practicing such an unusual method as "Sawtooth Lacing".


  1. In the lower rings, the lace must be inserted from the outside inward
  2. One lace (yellow in the picture) should run horizontally through all the rings
  3. The other (blue in the picture) is threaded obliquely with the obligatory skipping of one hole
  4. Continue this lacing until one of the ends of the lace ends.

This lacing is easy to tighten and looks very impressive. The lace, located diagonally, can be directed either to the right or to the left, or it can be completely opposite to each other.


Diagonal lacing

If Sawtooth Lacing doesn't impress you, try Commodity Lacing for yourself. This is a rare and unusual way of tying shoelaces. It also has the name "Diagonal lacing".


  1. Thread the string through the bottom holes from the outside in.
  2. One end of the lace should be significantly shorter than the other
  3. Pass the short end through the last hole on the opposite side.
  4. With the second end, thread the lace through all the holes to the very top, tie

Such lacing is quite practical, because it is quickly tied, untied and cut. There is only one drawback - the different lengths of the laces at the top of the sneaker.


Lacing women's sneakers and sneakers

Of course, lacing should be universal, male and female, in order to highlight and emphasize the elegance of even the most athletic shoes. Every woman should try this method of tying shoelaces at least once.

Lacing "Butterfly"

The most popular and simple is the Butterfly lacing.


It is called "butterfly" because it is compared with a men's butterfly ornament. This method most effectively lengthens the laces. The secret of this lacing is very simple: the laces are crossed on the front and stretched inside.

  1. First of all, you need to thread the laces from the outside inward and stretch them
  2. The lace inside should be pulled up, skipping one "floor" of holes
  3. After that, the laces are threaded and crossed on the outside.
  4. The action is repeated from top to bottom, wearing such lacing is very comfortable

Butterfly lacing can be worn in order to relieve pressure on the leg. The lacing gives the legs enough space and freedom.


Lacing men's sneakers and sneakers

Men's lacing should be original, stylish and reflect masculinity. Modern lacing is a way of self-expression, so your mood and character can be conveyed even in such trifles as the way you tie your shoelaces.


Lacing "Lightning"

One of the most popular laces for men is the Lightning lacing. Its name suggests that lacing is similar to a zipper. It is quite complex, but strong and reliable.


  1. It is necessary to stretch the lace through the lower holes and bring it out on both sides on the sides
  2. Both ends of the laces are tucked up to the ties at the same level and fed into the next pair of holes that are inside
  3. The ends of the laces must be crossed, threaded under the ties of the received level and raised
  4. These movements are repeated up to the very top.

The lacing looks very nice, it will add style and beauty to any men's shoes. Such lacing can look spectacular on moccasins, sneakers, sneakers and sports shoes.



Types and methods of lacing sneakers with 4, 5, 6, 7 holes

Sneaker lacing with 4 holes

Four-hole lacing certainly limits the ability to create intricate patterns or weaves. But even in such cases, you can achieve a beautiful and elegant design of the tie of the laces.
Four holes are considered to be on one side

The most popular option is to tie the laces with a cross outwards. This style does not cause negative emotions and looks decent enough. To do this, you need to thread the lace into the lower rings from the outside, take it out from the inside, cross it and thread it into the rings again.


Even stripes of lace look more impressive on shoes with 4 holes for laces. They visually lengthen the shoe. Lacing this style is not difficult, but it looks neat and fashionable.


Lacing sneakers with 5 holes

More lanyard holes more possibilities create a beautiful style for your shoes. Five holes is the most common number of holes on sneakers.

Have you ever tried lacing your sneakers with one lace? Be sure that this method will raise many questions from others and attract views.


But don't stop at simple options, after all, almost everyone can think of such. Interesting and popular is the "Knot" lacing. Everyone can do it and it is perfect for shoes with five holes:


  1. Insert the lace from the inside into the bottom holes and thread it outward, align the lace along the length
  2. Cross the cord by wrapping one end around the other and point them back to opposite sides
  3. Insert the lace each time from the inside and make a knot from the outside

Fancy lacing sneakers with 6 holes

Lacing shoes with six holes is a real playground for creativity. You are free to create the most unusual patterns and weaves with just laces. Choose flat laces of medium thickness and then you can definitely achieve a spectacular pattern on your shoes.

There is one way of lacing, which is called "Shop Lacing". It is very similar to the nodal one, but nevertheless it is not simple and is distinguished by intricate knitting.
Such lacing is suitable for both flat moccasins and voluminous shoes, because the weight of the secret lies in how gracefully you intertwine the two ends of the laces.


  1. The lace is threaded from the inside and out
  2. Both ends are threaded into the upper rings from their sides, threaded from the inside and returned to the outside.
  3. Each end is looped into the adjacent lace and pulled up again.
  4. A similar pattern is repeated to the very top.

The pattern is quite complex and it is able to tighten shoes, but its advantage is that it is also able to shorten long laces. The pattern looks neat and stylish.

Lacing sneakers with 7 holes

For those who want to transform shoes that have seven holes, there is a wonderful way called "For Racers". They came up with it so that long laces do not interfere, do not get tangled, and tightly tying shoes, hold them tightly on the leg.


  1. You should skip the lace diagonally and bring it out of the upper right and lower left holes
  2. The top lace (marked in blue) should zigzag down to the center of the shoe.
  3. The bottom lace (marked in yellow) should zigzag up to the center of the shoe.

The lacing looks quite modest and neat, but unusual, and taking off your shoes will not be easy.

Running shoe lacing

Sports shoes need a special lacing that will hold the sneakers firmly on the foot and allow the knot to untie.


  1. Initially, you need to bring the ends of each lace through the upper and lower holes of the left row of holes.
  2. Next, you should cross and enter these into the upper and lower holes of the right row of holes.
  3. The end of one lace must be lifted up through one hole, and the second lace must be brought out and pulled to the left.

Laced up? Then go ahead - run to health!


How beautiful to tie bows on sneakers and sneakers

Perhaps you have never thought about the fact that there are ways to non-standard tie shoelaces into bows. Everyone is used to either making a standard loop knot or hiding the ends of the laces.
But how often have you seen a bow tied on the side? This is a new solution to make shoes cute and cute.


  1. To knit such a pattern, you don’t need much, it’s enough just to repeat the same type of weaving on both sides.
  2. The ends of the laces move as if in a "Greek pattern", passing through the holes inward
  3. Some variation of the passage of the laces through the holes can be changed, for example, making them even or crosses
  4. The bow is tied on the side, the remaining long ends of the laces are removed and hidden.

Now sneakers, sneakers, boots and many other shoes, you tie in an original and simple way!

See also for more details.

on my sneakers there are only 5 holes, and on the Internet on all sites from 6 holes and moreAnna))

Alla 

Victoria Through the knee.

Kirill wow, people have problems...))

Ekaterina mesh from the nose: through one
*/* /*/*/
* ** * * and then in the other direction

Tags: How, you can, tie, laces, on, sneakers, with, 5, holes

VK group - Ideas for new...

This article will help you figure out how to tie your shoelaces beautifully! ... often encountered and fully reflects how beautifully you can tie your shoelaces! ... cool laces, but only designed for 5 holes on one side, ...

36 original ways to lace shoes

Today, shoes such as sneakers and sneakers have ceased to be considered only sports, moving into the category of everyday. Lacing can give originality to your shoes.
You don't have to use traditional laces. As an original decoration, wide silk ribbons, twisted threads, and strong braid of any kind are suitable. You can also use thin strips of durable fabric in two colors - with their help you will be able to recreate the so-called checkerboard lacing, which looks very beautiful. If the lacing of the sneaker is combined with any item of your outfit, such as a T-shirt or a bag, it will help you look very stylish. Do not be afraid to experiment - after all, such a seemingly inconspicuous detail as lacing can add zest to your image.
I want to bring to your attention 36 original ways of lacing shoes (boots, sneakers, sneakers).

1 Traditional cross lacing method


The lace is passed through the bottom holes and is brought out from both ends. The ends are crossed and then passed from the inside out through the holes. Reach the top holes and tie the laces. This method is easy and convenient.
2 Lacing with crosses above and below


If there is an odd number of pairs of holes on the boot, start lacing from the inside (as in the photo of the boot), and if there is an even number, then from above (as in the diagram). This is a very pretty and easy way to reduce wear on your laces as well!

3 Simple straight lacing

One end of the lace stretches immediately to the very top, and the other goes through all the holes. Suitable for boots with an even number of pairs of holes. It is quite difficult to align the tails of the laces to tie them, but the lacing looks very neat.

4 Lacing for woodland or cycling

It doesn’t look very good, but the lace knot, due to its location on the side (inside for the forest or outside for cycling), does not cling to or untie anything.

5 Store lacing


One end of the lace is immediately passed into the upper opposite hole, and the other end gradually laces the entire boot, making it look like a spiral. This method can be modified by skipping one end not obliquely, but hiding it as in a simple straight lacing (3rd way to lace up boots from this article).

6 Lacing World Wide Web


Very decorative lacing, especially for high boots or boots using laces in a contrasting color. Carefully follow the diagram so as not to get confused (start with the gray section-middle of the lace, then one end is shown in blue, the other in yellow).

7 Double reverse lacing


A more economical modification of the lacing method. For him, the laces are a little shorter.

8 Bow tie


Named for its resemblance to a bow tie. If there is an odd number of pairs of holes on the boot, then first make a straight stitch along the top (as in the diagram), if there is an even number - at the bottom (as in the photo of the boot). Butterfly crosses can be done on those parts of the boot that need to be pulled off, and skips where the foot can be given a little freedom. You can use relatively short laces!

9 Military lacing


This is reverse option butterfly lacing. Named military because soldiers of the British, Dutch, French and Brazilian armies lace up their boots this way. And what, it looks good, and the laces do not need long ...

10 Lacing Rail


It is very similar to the previous method, only on the inside the laces do not go diagonally, but straight. This method of lacing is only suitable for thin or flat laces because the laces go through the holes twice. That is why the lacing is very strong, but it is difficult to tighten it.

11 Double helix lacing


Beautiful and fast lacing that reduces friction and prolongs the life of your laces. The left and right boot can be laced up in a mirror image for symmetry.

12 Lacing Lattice


Such lacing is difficult to tighten, but, nevertheless, it is very popular for its decorative effect. To simplify the work, first weave the entire lacing with one end, and then pass the other end of the lace through the lattice. Such a lattice can only be woven on boots with 6 pairs of holes.

13 Lattice lacing


In fact, the same lacing as the previous one, but laces and a little shorter will fit for it. Economic option.

14 Zip closure

Often when buying sports shoes, the next time we wear it, we repeatedly think about how to lace up sneakers beautifully. And often the point is not even in beauty, but in convenience or in the features of the foot of the person who intends to wear them.

Why do you need sneakers?

The main purpose of this type of footwear is directly concentrated in its definition.

After all, sneakers are usually referred to as sports shoes. Many athletes prefer to wear only them to training and their performances. And modern youth, as well as children and their parents, have long appreciated the convenience of sneakers and always have this look in their shoe arsenal. It is important to know that the comfort when wearing sneakers largely depends not only on the shape, the material from which they are sewn, the quality of tailoring, but also on lacing. It would seem that this aspect should be last place, but most experienced athletes know that it is possible to remove the extra load from the foot thanks to him.

Why do you need lacing on sneakers?

I would like to note right away for the very curious people that there are various ways of lacing sneakers, and there are already more than 43 thousand of them. Their final count is led by the Australian Jan Figgen, who collects these methods. But in his book it is noted that speech in this case is specifically about those sneakers that have 6 standard holes for lacing. AT recent times Orthopedists and doctors around the world say that it is precisely the methods of lacing sneakers individually selected for him that can correct the wrong gait and make it more comfortable for the owner of sports shoes. At the same time, coaches in any sports are tired of repeating one simple truth- Properly laced sneakers will not only make it easier for athletes to do their work, but will certainly lead to a long-awaited victory. For example, triathletes need a type of lacing that instantly tightens or loosens their shoes, thereby saving the right amount of time. Or cyclists are advised to leave the laces on one side of the shoes, as they do not interfere with them when riding.

Basic rules for lacing

It turns out that in order to give a more complete answer to the question of how to properly lace up sneakers, you need to know a few additional tricks:


Types of lacing sneakers

They exist great amount. It all depends on whether you will use just a crossing or additional knots when lacing. And also the type of laces and their color affect the method of lacing. For example, there are:

  • nylon or synthetic laces - they are the most durable, look great on sports shoes and retain their appearance for a long time, but at the same time they are easily untied;
  • laces made from natural materials, say, cotton, leather, jute - of course, they are durable, but outwardly they are not so attractive;
  • in shape, round and flat laces are distinguished; naturally, flat ones are more firmly tied, but round ones look beautiful.

You can also divide the laces according to their length, for example, 20 or 40 cm.


The main thing is to understand that the methods of lacing sneakers differ from each other, depending on their purpose, that is, it can be:

  • beautiful tying - mainly when sneakers are worn not under sportswear, but, say, with a dress or skirt;
  • correct tying when we are talking about health and the main objective lacing in this case is the convenience of the foot in shoes;
  • non-standard tying - used by modern youth.

Standard shoe laces

We all know how to tie shoelaces, but few of us think about this process, usually everything happens automatically. How to lace up sneakers beautifully so that the shoes look unremarkable, but usually, and it is quite comfortable to walk in them. These options include the following:

Atypical shoe lacing

Usually it is used on youth versions of sports shoes, while two colors of laces are used. The process itself is very time consuming, but the result looks just amazing. How to lace up sneakers in an original way will tell you some of the options below, but remember that there are a great many of them, and this is just a small part:

  1. Lacing in the form of a cage - as an option, it is used by young people when it is necessary that the inscription on the tongue of the sneakers be most noticeable. It is easy to do, but hard to tighten: the laces are threaded into the upper holes on both sides, then two holes are skipped, the laces are crossed, and passed into the third holes. Threaded with inside back one hole, go up, and the procedure is repeated.
  2. Gossamer lacing: looks very nice, leaves short laces at the end. The meaning is as follows: the laces are threaded into the upper holes on both sides, then two holes are passed, crossed and go into the third holes. Then the laces from the inside go back to two holes. So the procedure is repeated one more time, and the laces are brought out into the last holes.
  3. Lacing in the form of a reverse loop: the plus is beauty, and the minuses are the wear of the laces and the fact that the entire lacing eventually shifts to one side. The laces are threaded into the upper holes from two ends, then rise up in a spiral, while intertwining with each other.

Proper shoe lacing

How to lace up the laces on sneakers so that after a long walk you feel good, and the process of movement itself brings only benefit and joy? Of course, the answer to this question is purely individual. After all, it all depends on whether there are painful conditions on the legs, whether the heel sags, whether the foot hurts. In this case, it would be best to contact an experienced trainer or a competent doctor who can suggest the most comfortable ways to lace up your sneakers specifically for you.


Beautiful ways to lace up sneakers

Let's not forget that this species shoes are very popular lately. And it has become fashionable to wear them not only with sportswear, but also with dresses, trousers, long and short skirts and many other clothing options. Therefore, the question of how to lace up sneakers beautifully has become very relevant. Of course, everyone's beauty standards are quite different, but neat and simple ways lacing sneakers will always remain in fashion:

  1. The lacing is straight. The meaning is this: one lace is immediately threaded into the very last hole and does not participate in the process, while the other is passed along the bottom and goes out, and so on until the very end. As a result, straight parallel lines should form on top.
  2. Lace in two colors. The secret is simple: two colors of laces are used, while they are cut almost in half and glued together. And then the direct lacing method is used. Only the resulting knot at the junction of two laces can put pressure on the little finger in the process of walking.
  3. Lacing with a ladder: the laces are threaded into the upper holes, then into the next holes, cross and pass under the opposite end of the vertical lacing, then the procedure is repeated. Very neat and beautiful.

Lacing depending on the foot: wide or narrow

How to lace up your sneakers beautifully, but at the same time feel comfortable and enjoy doing your favorite sports with pleasure? Doctors and trainers distinguish two types of foot and, depending on this, give some tips for lacing your sports shoes:

  • For a narrow foot: try to choose sneakers in which the lacing holes are located not directly opposite each other, but slightly obliquely. And use for tying those holes that are away from the tongue.
  • With a wide foot: use the same advice, only use closer holes for lacing. When tying, do not cross the laces along the entire length, pass some of them in a straight line into the next hole.

Lacing depending on the foot: high instep or a combination of narrow heel and wide toe


Not all feet have a standard shape and size. For some, the whole problem is the selection of a good pair of sports shoes, and even simple lacing becomes an unbearable ordeal. How cool is it to lace up sneakers, but at the same time not feel uncomfortable?

  • For high insteps, use straight lacing (i.e. horizontal parallel lines), and alternate between crossing the laces and threading them into adjacent holes.
  • When combining a wide toe and a narrow heel, first lace tightly, and at the end skip a few holes, threading the laces vertically into adjacent holes, and tie. Or use two laces, starting from the middle. Then you can loosen the top and tighten the bottom.

Remember what exists great multitude various ways how to lace up sneakers. Photos featured in our article and other media mass media, clearly show what should happen in the end. Therefore, carefully consider them and make your sports shoes more original and beautiful with lacing.